lkml.org 
[lkml]   [2020]   [Jun]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH v3] hwmon:(adm1275) Enable adm1278 ADM1278_TEMP1_EN
The adm1278 temp attribute need it for openbmc platform .
This feature not enabled by default, so PMON_CONFIG needs to enable it.

v3:
----
fix invalid signed-off.
removed checkpath warnings.
write ADM1278_TEMP1_EN and ADM1278_VOUT_EN conf in single line operation.

v2:
----
add Signed-off-by.
removed ADM1278_TEMP1_EN check.

Signed-off-by: Manikandan Elumalai <manikandan.hcl.ers.epl@gmail.com>
---
drivers/hwmon/pmbus/adm1275.c | 10 ++++------
1 file changed, 4 insertions(+), 6 deletions(-)

diff --git a/drivers/hwmon/pmbus/adm1275.c b/drivers/hwmon/pmbus/adm1275.c
index 5caa37fb..4782e31 100644
--- a/drivers/hwmon/pmbus/adm1275.c
+++ b/drivers/hwmon/pmbus/adm1275.c
@@ -666,11 +666,12 @@ static int adm1275_probe(struct i2c_client *client,
tindex = 3;

info->func[0] |= PMBUS_HAVE_PIN | PMBUS_HAVE_STATUS_INPUT |
- PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT;
+ PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT |
+ PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP;

- /* Enable VOUT if not enabled (it is disabled by default) */
+ /* Enable VOUT & TEMP1 if not enabled (disabled by default) */
if (!(config & ADM1278_VOUT_EN)) {
- config |= ADM1278_VOUT_EN;
+ config |= ADM1278_VOUT_EN | ADM1278_TEMP1_EN;
ret = i2c_smbus_write_byte_data(client,
ADM1275_PMON_CONFIG,
config);
@@ -681,9 +682,6 @@ static int adm1275_probe(struct i2c_client *client,
}
}

- if (config & ADM1278_TEMP1_EN)
- info->func[0] |=
- PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP;
if (config & ADM1278_VIN_EN)
info->func[0] |= PMBUS_HAVE_VIN;
break;
--
2.7.4
\
 
 \ /
  Last update: 2020-06-08 12:44    [W:0.069 / U:0.396 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site