lkml.org 
[lkml]   [2020]   [Jun]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH net] net: dp83869: Reset return variable if PHY strap is read
Date
When the PHY's strap register is read to determine if lane swapping is
needed the phy_read_mmd returns the value back into the ret variable.

If the call to read the strap fails the failed value is returned. If
the call to read the strap is successful then ret is possibly set to a
non-zero positive number. Without reseting the ret value to 0 this will
cause the parse DT function to return a failure.

Fixes: c4566aec6e808 ("net: phy: dp83869: Update port-mirroring to read straps")
Signed-off-by: Dan Murphy <dmurphy@ti.com>
---
drivers/net/phy/dp83869.c | 3 +++
1 file changed, 3 insertions(+)

diff --git a/drivers/net/phy/dp83869.c b/drivers/net/phy/dp83869.c
index df85ae5b79e4..53ed3abc26c9 100644
--- a/drivers/net/phy/dp83869.c
+++ b/drivers/net/phy/dp83869.c
@@ -218,10 +218,13 @@ static int dp83869_of_init(struct phy_device *phydev)
ret = phy_read_mmd(phydev, DP83869_DEVADDR, DP83869_STRAP_STS1);
if (ret < 0)
return ret;
+
if (ret & DP83869_STRAP_MIRROR_ENABLED)
dp83869->port_mirroring = DP83869_PORT_MIRRORING_EN;
else
dp83869->port_mirroring = DP83869_PORT_MIRRORING_DIS;
+
+ ret = 0;
}

if (of_property_read_u32(of_node, "rx-fifo-depth",
--
2.26.2
\
 
 \ /
  Last update: 2020-06-05 22:52    [W:0.032 / U:2.048 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site