lkml.org 
[lkml]   [2020]   [Jun]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH] ARM: dts: r8a7742-iwg21d-q7-dbcm-ca: Add device tree for camera DB
Hi Prabhakar,

On Wed, May 27, 2020 at 3:29 PM Lad Prabhakar
<prabhakar.mahadev-lad.rj@bp.renesas.com> wrote:
> Add support for the camera daughter board which is connected to
> iWave's RZ/G1H Qseven carrier board. Also enable ttySC[0135] and
> ethernet1 interfaces.
>
> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> Reviewed-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com>

Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>

> --- /dev/null
> +++ b/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts

> +&scifb1 {
> + pinctrl-0 = <&scifb1_pins>;
> + pinctrl-names = "default";
> + status = "okay";

Before I queue this in renesas-devel for v5.9, I have on question:
As this port carries RTS/CTS signals, perhaps you want to add

rts-gpios = <&gpio4 21 GPIO_ACTIVE_LOW>;
cts-gpios = <&gpio4 17 GPIO_ACTIVE_LOW>;

?

Gr{oetje,eeting}s,

Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds

\
 
 \ /
  Last update: 2020-06-05 14:27    [W:0.077 / U:0.320 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site