lkml.org 
[lkml]   [2020]   [Jun]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v6 8/8] ima: add FIRMWARE_PARTIAL_READ support
From
Date
On Fri, 2020-06-05 at 16:31 -0700, Scott Branden wrote:
> Hi Mimi,
>
> On 2020-06-05 4:19 p.m., Mimi Zohar wrote:
> > Hi Scott,
> >
> > On Fri, 2020-06-05 at 15:59 -0700, Scott Branden wrote:
> >> @@ -648,6 +667,9 @@ int ima_post_read_file(struct file *file, void *buf, loff_t size,
> >> enum ima_hooks func;
> >> u32 secid;
> >>
> >> + if (!file && read_id == READING_FIRMWARE_PARTIAL_READ)
> >> + return 0;
> > The file should be measured on the pre security hook, not here on the
> > post security hook.  Here, whether "file" is defined or not, is
> > irrelevant.  The test should just check "read_id".
> OK, will remove the !file from here.

thanks!

> >
> > Have you tested measuring the firmware by booting a system with
> > "ima_policy=tcb" specified on the boot command line and compared the
> > measurement entry in the IMA measurement list with the file hash (eg.
> > sha1sum, sha256sum)?
> Yes, I enabled IMA in my kernel and added ima_policy=tsb to the boot
> command line,
>
> Here are the entries from
> /sys/kernel/security/ima/ascii_runtime_measurements of the files I am
> accessing.
> Please let me know if I am doing anything incorrectly.
>
> 10 4612bce355b2dbc45ecd95e17001636be8832c7f ima-ng
> sha1:fddd9a28c2b15acf3b0fc9ec0cf187cb2153d7f2
> /lib/firmware/vk-boot1-bcm958401m2.ecdsa.bin
> 10 4c0eb0fc30eb7ac3a30a27f05c1d2a8d28d6a9ec ima-ng
> sha1:b16d343dd63352d10309690c71b110762a9444c3
> /lib/firmware/vk-boot2-bcm958401m2_a72.ecdsn
>
> The sha1 sum matches:
> root@genericx86-64:/sys/kernel/security/ima# sha1sum
> /lib/firmware/vk-boot1-bcm958401m2.ecdsa.bin
> fddd9a28c2b15acf3b0fc9ec0cf187cb2153d7f2
> /lib/firmware/vk-boot1-bcm958401m2.ecdsa.bin
>
> root@genericx86-64:/sys/kernel/security/ima# sha1sum
> /lib/firmware/vk-boot2-bcm958401m2_a72.ecdsa.bin
> b16d343dd63352d10309690c71b110762a9444c3
> /lib/firmware/vk-boot2-bcm958401m2_a72.ecdsa.bin

Looks good!

(FYI, a larger hash algorithm can be specified in the Kconfig or
"ima_hash=" on the boot command line.)

Mimi

\
 
 \ /
  Last update: 2020-06-06 01:49    [W:0.128 / U:0.104 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site