lkml.org 
[lkml]   [2020]   [Jun]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 2/3] ARM: dts: bcm2711: Update SPI nodes compatible strings
From
Date


On 6/4/2020 9:54 AM, Stefan Wahren wrote:
> Am 04.06.20 um 18:40 schrieb Florian Fainelli:
>>
>> On 6/3/2020 9:20 PM, Lukas Wunner wrote:
>>> On Wed, Jun 03, 2020 at 08:46:54PM -0700, Florian Fainelli wrote:
>>>> The BCM2711 SoC features 5 SPI controllers which all share the same
>>>> interrupt line, the SPI driver needs to support interrupt sharing,
>>>> therefore use the chip specific compatible string to help with that.
>>> You're saying above that the 5 controllers all share the interrupt
>>> but below you're only changing the compatible string of 4 controllers.
>>>
>>> So I assume spi0 still has its own interrupt and only the additional
>>> 4 controllers present on the BCM2711/BCM7211 share their interrupt?
>> Correct, there are 5 instances, but only the 4 that were added for 2711
>> actually share the interrupt line, I will correct that in the next patch
>> version.
>
> No, all 5 instances uses the same interrupt line. Please see my comment
> before.

OK, but this is not going to be needed, I have another solution that
does not involve device tree changes.
--
Florian

\
 
 \ /
  Last update: 2020-06-04 18:57    [W:0.069 / U:0.196 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site