lkml.org 
[lkml]   [2020]   [Jun]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 3/3] clk: X1000: Add support for calculat REFCLK of USB PHY.
Date
Add functions for calculat the rate of REFCLK, which is needed by
USB PHY in Ingenic X1000 SoC.

Tested-by: 周正 (Zhou Zheng) <sernia.zhou@foxmail.com>
Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
---

Notes:
v1->v2:
1.Use "WARN()" instead "BUG()".
2.Remove unnecessary get_parent/set_parent functions.

v2->v3:
1.Remove the wrong "WARN()";
2.Fix wrong parameters in recalc_rate/set_rate functions.

drivers/clk/ingenic/x1000-cgu.c | 84 ++++++++++++++++++++++++++++++++++++++++-
1 file changed, 83 insertions(+), 1 deletion(-)

diff --git a/drivers/clk/ingenic/x1000-cgu.c b/drivers/clk/ingenic/x1000-cgu.c
index 453f3323cb99..38143bcd4cbd 100644
--- a/drivers/clk/ingenic/x1000-cgu.c
+++ b/drivers/clk/ingenic/x1000-cgu.c
@@ -48,8 +48,87 @@
#define USBPCR_SIDDQ BIT(21)
#define USBPCR_OTG_DISABLE BIT(20)

+/* bits within the USBPCR1 register */
+#define USBPCR1_REFCLKSEL_SHIFT 26
+#define USBPCR1_REFCLKSEL_MASK (0x3 << USBPCR1_REFCLKSEL_SHIFT)
+#define USBPCR1_REFCLKSEL_CORE (0x2 << USBPCR1_REFCLKSEL_SHIFT)
+#define USBPCR1_REFCLKDIV_SHIFT 24
+#define USBPCR1_REFCLKDIV_MASK (0x3 << USBPCR1_REFCLKDIV_SHIFT)
+#define USBPCR1_REFCLKDIV_48 (0x2 << USBPCR1_REFCLKDIV_SHIFT)
+#define USBPCR1_REFCLKDIV_24 (0x1 << USBPCR1_REFCLKDIV_SHIFT)
+#define USBPCR1_REFCLKDIV_12 (0x0 << USBPCR1_REFCLKDIV_SHIFT)
+
static struct ingenic_cgu *cgu;

+static unsigned long x1000_otg_phy_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ u32 usbpcr1;
+ unsigned refclk_div;
+
+ usbpcr1 = readl(cgu->base + CGU_REG_USBPCR1);
+ refclk_div = usbpcr1 & USBPCR1_REFCLKDIV_MASK;
+
+ switch (refclk_div) {
+ case USBPCR1_REFCLKDIV_12:
+ return 12000000;
+
+ case USBPCR1_REFCLKDIV_24:
+ return 24000000;
+
+ case USBPCR1_REFCLKDIV_48:
+ return 48000000;
+ }
+
+ return parent_rate;
+}
+
+static long x1000_otg_phy_round_rate(struct clk_hw *hw, unsigned long req_rate,
+ unsigned long *parent_rate)
+{
+ if (req_rate < 18000000)
+ return 12000000;
+
+ if (req_rate < 36000000)
+ return 24000000;
+
+ return 48000000;
+}
+
+static int x1000_otg_phy_set_rate(struct clk_hw *hw, unsigned long req_rate,
+ unsigned long parent_rate)
+{
+ unsigned long flags;
+ u32 usbpcr1, div_bits;
+
+ switch (req_rate) {
+ case 12000000:
+ div_bits = USBPCR1_REFCLKDIV_12;
+ break;
+
+ case 24000000:
+ div_bits = USBPCR1_REFCLKDIV_24;
+ break;
+
+ case 48000000:
+ div_bits = USBPCR1_REFCLKDIV_48;
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ spin_lock_irqsave(&cgu->lock, flags);
+
+ usbpcr1 = readl(cgu->base + CGU_REG_USBPCR1);
+ usbpcr1 &= ~USBPCR1_REFCLKDIV_MASK;
+ usbpcr1 |= div_bits;
+ writel(usbpcr1, cgu->base + CGU_REG_USBPCR1);
+
+ spin_unlock_irqrestore(&cgu->lock, flags);
+ return 0;
+}
+
static int x1000_usb_phy_enable(struct clk_hw *hw)
{
void __iomem *reg_opcr = cgu->base + CGU_REG_OPCR;
@@ -80,6 +159,10 @@ static int x1000_usb_phy_is_enabled(struct clk_hw *hw)
}

static const struct clk_ops x1000_otg_phy_ops = {
+ .recalc_rate = x1000_otg_phy_recalc_rate,
+ .round_rate = x1000_otg_phy_round_rate,
+ .set_rate = x1000_otg_phy_set_rate,
+
.enable = x1000_usb_phy_enable,
.disable = x1000_usb_phy_disable,
.is_enabled = x1000_usb_phy_is_enabled,
@@ -144,7 +227,6 @@ static const struct ingenic_cgu_clk_info x1000_cgu_clocks[] = {
},
},

-
/* Custom (SoC-specific) OTG PHY */

[X1000_CLK_OTGPHY] = {
--
2.11.0
\
 
 \ /
  Last update: 2020-06-30 18:40    [W:0.053 / U:5.136 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site