lkml.org 
[lkml]   [2020]   [Jun]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/7] ARM: dts: qcom: msm8974-klte: Add support for touchkey
Date
Add support for the touchkey found on the Samsung Galaxy S5. The
touchkey is responsible for handling the application and back buttons
found around the home button.

Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com>
---
.../boot/dts/qcom-msm8974-samsung-klte.dts | 44 ++++++++++++++++++-
1 file changed, 43 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts b/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts
index 9520c6e7910ce..750e2f261139a 100644
--- a/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts
+++ b/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts
@@ -145,7 +145,7 @@ pma8084_l18: l18 {
};

pma8084_l19: l19 {
- regulator-min-microvolt = <2900000>;
+ regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};

@@ -203,6 +203,31 @@ pma8084_l27: l27 {
};
};

+ i2c-gpio-touchkey {
+ compatible = "i2c-gpio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ sda-gpios = <&msmgpio 95 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ scl-gpios = <&msmgpio 96 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c_touchkey_pins>;
+
+ touchkey@20 {
+ compatible = "cypress,tm2-touchkey";
+ reg = <0x20>;
+
+ interrupt-parent = <&pma8084_gpios>;
+ interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&touchkey_pin>;
+
+ vcc-supply = <&max77826_ldo15>;
+ vdd-supply = <&pma8084_l19>;
+
+ linux,keycodes = <KEY_APPSELECT KEY_BACK>;
+ };
+ };
+
/delete-node/ vreg-boost;
};

@@ -268,6 +293,15 @@ mux {
bias-disable;
};
};
+
+ i2c_touchkey_pins: i2c-touchkey {
+ mux {
+ pins = "gpio95", "gpio96";
+ function = "gpio";
+ input-enable;
+ bias-pull-up;
+ };
+ };
};

sdhci@f9824900 {
@@ -418,6 +452,14 @@ gpio_keys_pin_a: gpio-keys-active {
bias-pull-up;
power-source = <PMA8084_GPIO_S4>;
};
+
+ touchkey_pin: touchkey-int-pin {
+ pins = "gpio6";
+ function = "normal";
+ bias-disable;
+ input-enable;
+ power-source = <PMA8084_GPIO_S4>;
+ };
};
};
};
--
2.27.0
\
 
 \ /
  Last update: 2020-06-30 16:09    [W:0.089 / U:0.148 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site