[lkml]   [2020]   [Jun]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: [EXT] Re: [PATCH v4 2/2] ARM: imx6plus: enable internal routing of clk_enet_ref where possible
Hi Andy,

On Tue, Jun 30, 2020 at 3:36 AM Andy Duan <> wrote:

> Fabio, our QA double verify 5.4.24_2.1.0, no matter SD boot or tftp/nfs boot,
> both work fine on i.MX6QP sabresd board, please double check your environment.

Is static IP or DHCP used on these tests?

I have an SCH-28857 REV A2 imx6qp sabresd board here and "udhcpc -i
eth0" fails 100% of the times if GPR5[9] is set.

 \ /
  Last update: 2020-06-30 13:50    [W:0.110 / U:0.384 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site