lkml.org 
[lkml]   [2020]   [Jun]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v4 0/2] pinctrl: single: support #pinctrl-cells = 2
Date
Currently, pinctrl-single only allows #pinctrl-cells = 1.

This series will allow pinctrl-single to also support #pinctrl-cells = 2

If "pinctrl-single,pins" has 3 arguments (offset, conf, mux) then
pcs_parse_one_pinctrl_entry() does an OR operation on conf and mux to
get the value to store in the register.

To take advantage of #pinctrl-cells = 2, the AM33XX_PADCONF macro in
omap.h is modified to keep pin conf and pin mux values separate.

change log:
- v4: squash patches 2 and 3 together so that git biesct will not result
in a boot failure

- v3: change order of patches to make sure the pinctrl-single.c patch
does not break anything without the dts patches

- v2: remove outer parentheses from AM33XX_PADCONF macro as it causes a
compile error in dtc. I had added it per suggestion from checkpatch
about having parentheses around complex values.

Drew Fustini (2):
pinctrl: single: parse #pinctrl-cells = 2
ARM: dts: am33xx-l4: change #pinctrl-cells from 1 to 2

arch/arm/boot/dts/am33xx-l4.dtsi | 2 +-
drivers/pinctrl/pinctrl-single.c | 11 +++++++++--
include/dt-bindings/pinctrl/omap.h | 2 +-
3 files changed, 11 insertions(+), 4 deletions(-)

--
2.25.1

\
 
 \ /
  Last update: 2020-07-01 03:34    [W:0.258 / U:0.008 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site