lkml.org 
[lkml]   [2020]   [Jun]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [RFC PATCH v4] kbuild: add variables for compression tools
On Wed, Jun 3, 2020 at 6:19 PM Denis Efremov <efremov@linux.com> wrote:
>
> Allow user to use alternative implementations of compression tools,
> such as pigz, pbzip2, pxz. For example, multi-threaded tools to
> speed up the build:
> $ make GZIP=pigz BZIP2=pbzip2
>
> Variables _GZIP, _BZIP2, _LZOP are used internally because original env
> vars are reserved by the tools. The use of GZIP in gzip tool is obsolete
> since 2015. However, alternative implementations (e.g., pigz) still rely
> on it. BZIP2, BZIP, LZOP vars are not obsolescent.
>
> The credit goes to @grsecurity.
>
> As a sidenote, for multi-threaded lzma, xz compression one can use:
> $ export XZ_OPT="--threads=0"
>
> Signed-off-by: Denis Efremov <efremov@linux.com>
> ---

Applied to linux-kbuild.
Thanks.



> Changes in v2:
> - _GZIP used instead of GZIP
> - tar commands altered to use tools from the vars
> Changes in v3:
> - _BZIP2 used instead of BZIP2
> - _LZOP used instead of LZOP
> Changes in v4:
> - Unexports removed from Kbuild.include
> - MAKEOVERRIDES used in top Makefile
> - All variables checks removed from scripts
>
> Makefile | 25 +++++++++++++++++++++++--
> arch/arm/boot/deflate_xip_data.sh | 2 +-
> arch/ia64/Makefile | 2 +-
> arch/m68k/Makefile | 8 ++++----
> arch/mips/lasat/image/Makefile | 2 +-
> arch/parisc/Makefile | 2 +-
> kernel/gen_kheaders.sh | 2 +-
> scripts/Makefile.lib | 12 ++++++------
> scripts/Makefile.package | 8 ++++----
> scripts/package/buildtar | 6 +++---
> scripts/xz_wrap.sh | 2 +-
> 11 files changed, 46 insertions(+), 25 deletions(-)
>
> diff --git a/Makefile b/Makefile
> index b668725a2a62..9a9cce1ed83d 100644
> --- a/Makefile
> +++ b/Makefile
> @@ -447,6 +447,26 @@ PYTHON = python
> PYTHON3 = python3
> CHECK = sparse
> BASH = bash
> +GZIP = gzip
> +BZIP2 = bzip2
> +LZOP = lzop
> +LZMA = lzma
> +LZ4 = lz4c
> +XZ = xz
> +
> +# GZIP, BZIP2, LZOP env vars are used by the tools. Support them as the command
> +# line interface, but use _GZIP, _BZIP2, _LZOP internally.
> +_GZIP := $(GZIP)
> +_BZIP2 := $(BZIP2)
> +_LZOP := $(LZOP)
> +
> +# Reset GZIP, BZIP2, LZOP in this Makefile
> +override GZIP=
> +override BZIP2=
> +override LZOP=
> +
> +# Reset GZIP, BZIP2, LZOP in recursive invocations
> +MAKEOVERRIDES += GZIP= BZIP2= LZOP=
>
> CHECKFLAGS := -D__linux__ -Dlinux -D__STDC__ -Dunix -D__unix__ \
> -Wbitwise -Wno-return-void -Wno-unknown-attribute $(CF)
> @@ -495,6 +515,7 @@ CLANG_FLAGS :=
> export ARCH SRCARCH CONFIG_SHELL BASH HOSTCC KBUILD_HOSTCFLAGS CROSS_COMPILE LD CC
> export CPP AR NM STRIP OBJCOPY OBJDUMP OBJSIZE READELF PAHOLE LEX YACC AWK INSTALLKERNEL
> export PERL PYTHON PYTHON3 CHECK CHECKFLAGS MAKE UTS_MACHINE HOSTCXX
> +export _GZIP _BZIP2 _LZOP LZMA LZ4 XZ
> export KBUILD_HOSTCXXFLAGS KBUILD_HOSTLDFLAGS KBUILD_HOSTLDLIBS LDFLAGS_MODULE
>
> export KBUILD_CPPFLAGS NOSTDINC_FLAGS LINUXINCLUDE OBJCOPYFLAGS KBUILD_LDFLAGS
> @@ -1005,10 +1026,10 @@ export mod_strip_cmd
> mod_compress_cmd = true
> ifdef CONFIG_MODULE_COMPRESS
> ifdef CONFIG_MODULE_COMPRESS_GZIP
> - mod_compress_cmd = gzip -n -f
> + mod_compress_cmd = $(_GZIP) -n -f
> endif # CONFIG_MODULE_COMPRESS_GZIP
> ifdef CONFIG_MODULE_COMPRESS_XZ
> - mod_compress_cmd = xz -f
> + mod_compress_cmd = $(XZ) -f
> endif # CONFIG_MODULE_COMPRESS_XZ
> endif # CONFIG_MODULE_COMPRESS
> export mod_compress_cmd
> diff --git a/arch/arm/boot/deflate_xip_data.sh b/arch/arm/boot/deflate_xip_data.sh
> index 40937248cebe..739f0464321e 100755
> --- a/arch/arm/boot/deflate_xip_data.sh
> +++ b/arch/arm/boot/deflate_xip_data.sh
> @@ -56,7 +56,7 @@ trap 'rm -f "$XIPIMAGE.tmp"; exit 1' 1 2 3
> # substitute the data section by a compressed version
> $DD if="$XIPIMAGE" count=$data_start iflag=count_bytes of="$XIPIMAGE.tmp"
> $DD if="$XIPIMAGE" skip=$data_start iflag=skip_bytes |
> -gzip -9 >> "$XIPIMAGE.tmp"
> +$_GZIP -9 >> "$XIPIMAGE.tmp"
>
> # replace kernel binary
> mv -f "$XIPIMAGE.tmp" "$XIPIMAGE"
> diff --git a/arch/ia64/Makefile b/arch/ia64/Makefile
> index 32240000dc0c..f817f3d5e758 100644
> --- a/arch/ia64/Makefile
> +++ b/arch/ia64/Makefile
> @@ -40,7 +40,7 @@ $(error Sorry, you need a newer version of the assember, one that is built from
> endif
>
> quiet_cmd_gzip = GZIP $@
> -cmd_gzip = cat $(real-prereqs) | gzip -n -f -9 > $@
> +cmd_gzip = cat $(real-prereqs) | $(_GZIP) -n -f -9 > $@
>
> quiet_cmd_objcopy = OBJCOPY $@
> cmd_objcopy = $(OBJCOPY) $(OBJCOPYFLAGS) $(OBJCOPYFLAGS_$(@F)) $< $@
> diff --git a/arch/m68k/Makefile b/arch/m68k/Makefile
> index 5d9288384096..ce6db5e5a5a3 100644
> --- a/arch/m68k/Makefile
> +++ b/arch/m68k/Makefile
> @@ -135,10 +135,10 @@ vmlinux.gz: vmlinux
> ifndef CONFIG_KGDB
> cp vmlinux vmlinux.tmp
> $(STRIP) vmlinux.tmp
> - gzip -9c vmlinux.tmp >vmlinux.gz
> + $(_GZIP) -9c vmlinux.tmp >vmlinux.gz
> rm vmlinux.tmp
> else
> - gzip -9c vmlinux >vmlinux.gz
> + $(_GZIP) -9c vmlinux >vmlinux.gz
> endif
>
> bzImage: vmlinux.bz2
> @@ -148,10 +148,10 @@ vmlinux.bz2: vmlinux
> ifndef CONFIG_KGDB
> cp vmlinux vmlinux.tmp
> $(STRIP) vmlinux.tmp
> - bzip2 -1c vmlinux.tmp >vmlinux.bz2
> + $(_BZIP2) -1c vmlinux.tmp >vmlinux.bz2
> rm vmlinux.tmp
> else
> - bzip2 -1c vmlinux >vmlinux.bz2
> + $(_BZIP2) -1c vmlinux >vmlinux.bz2
> endif
>
> archclean:
> diff --git a/arch/mips/lasat/image/Makefile b/arch/mips/lasat/image/Makefile
> index 78ce4cff1012..24d8dbde1109 100644
> --- a/arch/mips/lasat/image/Makefile
> +++ b/arch/mips/lasat/image/Makefile
> @@ -44,7 +44,7 @@ $(obj)/%.o: $(obj)/%.gz
> $(LD) -r -o $@ -b binary $<
>
> $(obj)/%.gz: $(obj)/%.bin
> - gzip -cf -9 $< > $@
> + $(_GZIP) -cf -9 $< > $@
>
> $(obj)/kImage.bin: $(KERNEL_IMAGE)
> $(OBJCOPY) -O binary -S $^ $@
> diff --git a/arch/parisc/Makefile b/arch/parisc/Makefile
> index 628cd8bb7ad8..e1aa514aeb36 100644
> --- a/arch/parisc/Makefile
> +++ b/arch/parisc/Makefile
> @@ -162,7 +162,7 @@ vmlinuz: bzImage
> $(OBJCOPY) $(boot)/bzImage $@
> else
> vmlinuz: vmlinux
> - @gzip -cf -9 $< > $@
> + @$(_GZIP) -cf -9 $< > $@
> endif
>
> install:
> diff --git a/kernel/gen_kheaders.sh b/kernel/gen_kheaders.sh
> index e13ca842eb7e..c1510f0ab3ea 100755
> --- a/kernel/gen_kheaders.sh
> +++ b/kernel/gen_kheaders.sh
> @@ -88,7 +88,7 @@ find $cpio_dir -type f -print0 |
> find $cpio_dir -printf "./%P\n" | LC_ALL=C sort | \
> tar "${KBUILD_BUILD_TIMESTAMP:+--mtime=$KBUILD_BUILD_TIMESTAMP}" \
> --owner=0 --group=0 --numeric-owner --no-recursion \
> - -Jcf $tarfile -C $cpio_dir/ -T - > /dev/null
> + -I $XZ -cf $tarfile -C $cpio_dir/ -T - > /dev/null
>
> echo $headers_md5 > kernel/kheaders.md5
> echo "$this_file_md5" >> kernel/kheaders.md5
> diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib
> index 4b799737722c..a1c1424e6b52 100644
> --- a/scripts/Makefile.lib
> +++ b/scripts/Makefile.lib
> @@ -241,7 +241,7 @@ cmd_objcopy = $(OBJCOPY) $(OBJCOPYFLAGS) $(OBJCOPYFLAGS_$(@F)) $< $@
> # ---------------------------------------------------------------------------
>
> quiet_cmd_gzip = GZIP $@
> - cmd_gzip = cat $(real-prereqs) | gzip -n -f -9 > $@
> + cmd_gzip = cat $(real-prereqs) | $(_GZIP) -n -f -9 > $@
>
> # DTC
> # ---------------------------------------------------------------------------
> @@ -334,19 +334,19 @@ printf "%08x\n" $$dec_size | \
> )
>
> quiet_cmd_bzip2 = BZIP2 $@
> - cmd_bzip2 = { cat $(real-prereqs) | bzip2 -9; $(size_append); } > $@
> + cmd_bzip2 = { cat $(real-prereqs) | $(_BZIP2) -9; $(size_append); } > $@
>
> # Lzma
> # ---------------------------------------------------------------------------
>
> quiet_cmd_lzma = LZMA $@
> - cmd_lzma = { cat $(real-prereqs) | lzma -9; $(size_append); } > $@
> + cmd_lzma = { cat $(real-prereqs) | $(LZMA) -9; $(size_append); } > $@
>
> quiet_cmd_lzo = LZO $@
> - cmd_lzo = { cat $(real-prereqs) | lzop -9; $(size_append); } > $@
> + cmd_lzo = { cat $(real-prereqs) | $(_LZOP) -9; $(size_append); } > $@
>
> quiet_cmd_lz4 = LZ4 $@
> - cmd_lz4 = { cat $(real-prereqs) | lz4c -l -c1 stdin stdout; \
> + cmd_lz4 = { cat $(real-prereqs) | $(LZ4) -l -c1 stdin stdout; \
> $(size_append); } > $@
>
> # U-Boot mkimage
> @@ -393,7 +393,7 @@ quiet_cmd_xzkern = XZKERN $@
> $(size_append); } > $@
>
> quiet_cmd_xzmisc = XZMISC $@
> - cmd_xzmisc = cat $(real-prereqs) | xz --check=crc32 --lzma2=dict=1MiB > $@
> + cmd_xzmisc = cat $(real-prereqs) | $(XZ) --check=crc32 --lzma2=dict=1MiB > $@
>
> # ASM offsets
> # ---------------------------------------------------------------------------
> diff --git a/scripts/Makefile.package b/scripts/Makefile.package
> index 02135d2671a6..b2b6153af63a 100644
> --- a/scripts/Makefile.package
> +++ b/scripts/Makefile.package
> @@ -45,7 +45,7 @@ if test "$(objtree)" != "$(srctree)"; then \
> false; \
> fi ; \
> $(srctree)/scripts/setlocalversion --save-scmversion; \
> -tar -cz $(RCS_TAR_IGNORE) -f $(2).tar.gz \
> +tar -I $(_GZIP) -c $(RCS_TAR_IGNORE) -f $(2).tar.gz \
> --transform 's:^:$(2)/:S' $(TAR_CONTENT) $(3); \
> rm -f $(objtree)/.scmversion
>
> @@ -127,9 +127,9 @@ util/PERF-VERSION-GEN $(CURDIR)/$(perf-tar)/); \
> tar rf $(perf-tar).tar $(perf-tar)/HEAD $(perf-tar)/PERF-VERSION-FILE; \
> rm -r $(perf-tar); \
> $(if $(findstring tar-src,$@),, \
> -$(if $(findstring bz2,$@),bzip2, \
> -$(if $(findstring gz,$@),gzip, \
> -$(if $(findstring xz,$@),xz, \
> +$(if $(findstring bz2,$@),$(_BZIP2), \
> +$(if $(findstring gz,$@),$(_GZIP), \
> +$(if $(findstring xz,$@),$(XZ), \
> $(error unknown target $@)))) \
> -f -9 $(perf-tar).tar)
>
> diff --git a/scripts/package/buildtar b/scripts/package/buildtar
> index 77c7caefede1..ad62c6879622 100755
> --- a/scripts/package/buildtar
> +++ b/scripts/package/buildtar
> @@ -28,15 +28,15 @@ case "${1}" in
> opts=
> ;;
> targz-pkg)
> - opts=--gzip
> + opts="-I ${_GZIP}"
> tarball=${tarball}.gz
> ;;
> tarbz2-pkg)
> - opts=--bzip2
> + opts="-I ${_BZIP2}"
> tarball=${tarball}.bz2
> ;;
> tarxz-pkg)
> - opts=--xz
> + opts="-I ${XZ}"
> tarball=${tarball}.xz
> ;;
> *)
> diff --git a/scripts/xz_wrap.sh b/scripts/xz_wrap.sh
> index 7a2d372f4885..76e9cbcfbeab 100755
> --- a/scripts/xz_wrap.sh
> +++ b/scripts/xz_wrap.sh
> @@ -20,4 +20,4 @@ case $SRCARCH in
> sparc) BCJ=--sparc ;;
> esac
>
> -exec xz --check=crc32 $BCJ --lzma2=$LZMA2OPTS,dict=32MiB
> +exec $XZ --check=crc32 $BCJ --lzma2=$LZMA2OPTS,dict=32MiB
> --
> 2.26.2
>


--
Best Regards
Masahiro Yamada

\
 
 \ /
  Last update: 2020-06-04 02:15    [W:0.171 / U:4.364 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site