lkml.org 
[lkml]   [2020]   [Jun]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v4 6/6] arm64: dts: k3-j721e-proc-board: Add wait time for sampling Type-C DIR line
Date
The Type-C compainon chip on the board needs ~133ms (tCCB_DEFAULT)
to debounce the CC lines in order to detect attach and plug orientation
and reflect the correct DIR status. [1]

On the EVM however we need to wait upto 700ms before sampling the
Type-C DIR line else we can get incorrect direction state.

[1] http://www.ti.com/lit/ds/symlink/tusb321.pdf

Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
---
arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts | 1 +
1 file changed, 1 insertion(+)

diff --git a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
index 3294b96ebba8..6307fe5ccb06 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
@@ -350,6 +350,7 @@

&serdes_wiz3 {
typec-dir-gpios = <&main_gpio1 3 GPIO_ACTIVE_HIGH>;
+ typec-dir-debounce-ms = <700>; /* TUSB321, tCCB_DEFAULT 133 ms */
};

&serdes3 {
--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
\
 
 \ /
  Last update: 2020-06-29 21:52    [W:0.050 / U:4.316 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site