lkml.org 
[lkml]   [2020]   [Jun]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v9 0/3] phy: zynqmp: Add PHY driver for the Xilinx ZynqMP Gigabit Transceiver
On 29-06-20, 15:00, Laurent Pinchart wrote:
> Hello,
>
> The patch series adds a PHY driver for the Xilinx ZynqMP gigabit serial
> transceivers (PS-GTR). The PS-GTR is a set of 4 PHYs that can be used by
> the PCIe, USB 3.0, DisplayPort, SATA and Ethernet controllers that are
> part of the Serial I/O Unit (SIOU).
>
> The code is based on a previous version sent by Anurag Kumar Vulisha and
> available at [1]. The DT bindings have been converted to YAML, and both
> the bindings and the driver have been considerably reworked (and
> simplified). The most notable changes is the removal of manual handling
> of the reset lines of the PHY users (which belongs to the PHY users
> themselves), and moving to the standard PHY .power_on() and .configure()
> operations to replace functions that were previously exported by the
> driver. Please see individual patches for a more detailed changelog.
>
> Compared to v8, the series has been rebased on phy/next, and a minor
> issue in MAINTAINERS has been fixed.

Thanks for quick rebase, Applied 1 & 2 now

>
> [1] https://patchwork.kernel.org/cover/10735681/
>
> Anurag Kumar Vulisha (2):
> dt-bindings: phy: Add DT bindings for Xilinx ZynqMP PSGTR PHY
> phy: zynqmp: Add PHY driver for the Xilinx ZynqMP Gigabit Transceiver
>
> Laurent Pinchart (1):
> arm64: dts: zynqmp: Add GTR transceivers
>
> .../bindings/phy/xlnx,zynqmp-psgtr.yaml | 105 ++
> MAINTAINERS | 9 +
> arch/arm64/boot/dts/xilinx/zynqmp.dtsi | 10 +
> drivers/phy/Kconfig | 1 +
> drivers/phy/Makefile | 3 +-
> drivers/phy/xilinx/Kconfig | 13 +
> drivers/phy/xilinx/Makefile | 3 +
> drivers/phy/xilinx/phy-zynqmp.c | 995 ++++++++++++++++++
> include/dt-bindings/phy/phy.h | 1 +
> 9 files changed, 1139 insertions(+), 1 deletion(-)
> create mode 100644 Documentation/devicetree/bindings/phy/xlnx,zynqmp-psgtr.yaml
> create mode 100644 drivers/phy/xilinx/Kconfig
> create mode 100644 drivers/phy/xilinx/Makefile
> create mode 100644 drivers/phy/xilinx/phy-zynqmp.c
>
> --
> Regards,
>
> Laurent Pinchart

--
~Vinod

\
 
 \ /
  Last update: 2020-06-29 20:41    [W:0.179 / U:0.044 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site