lkml.org 
[lkml]   [2020]   [Jun]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
SubjectRe: [PATCH] usb: chipidea: fix ci_irq for role-switching use-case
Date
On Mon, 2020-06-29 at 07:26 +0000, Peter Chen wrote:
> On 20-06-26 13:03:11, Philippe Schenker wrote:
> > If the hardware is in low-power-mode and one plugs in device or host
> > it did not switch the mode due to the early exit out of the
> > interrupt.
>
> Do you mean there is no coming call for role-switch? Could you please
> share
> your dts changes? Try below patch:

Here are my DTS changes:

diff --git a/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi
b/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi
index 97601375f2640..c424f707a1afa 100644
--- a/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi
+++ b/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi
@@ -13,6 +13,13 @@
stdout-path = "serial0:115200n8";
};

+ extcon_usbc_det: usbc_det {
+ compatible = "linux,extcon-usb-gpio";
+ id-gpio = <&gpio7 14 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbc_det>;
+ };
+
/* fixed crystal dedicated to mpc258x */
clk16m: clk16m {
compatible = "fixed-clock";
@@ -174,6 +181,7 @@
};

&usbotg1 {
+ extcon = <&extcon_usbc_det>, <&extcon_usbc_det>;
status = "okay";
};

diff --git a/arch/arm/boot/dts/imx7-colibri.dtsi
b/arch/arm/boot/dts/imx7-colibri.dtsi
index e18e89dec8792..caea90d2421fd 100644
--- a/arch/arm/boot/dts/imx7-colibri.dtsi
+++ b/arch/arm/boot/dts/imx7-colibri.dtsi
@@ -457,7 +457,7 @@
};

&usbotg1 {
- dr_mode = "host";
+ dr_mode = "otg";
};

&usdhc1 {
@@ -486,7 +486,7 @@
&iomuxc {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpio1 &pinctrl_gpio2 &pinctrl_gpio3
&pinctrl_gpio4
- &pinctrl_gpio7 &pinctrl_usbc_det>;
+ &pinctrl_gpio7>;

pinctrl_gpio1: gpio1-grp {
fsl,pins = <
>
>
> diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c
> index e8ce300ad490..9e10dcfeb98f 100644
> --- a/drivers/usb/chipidea/core.c
> +++ b/drivers/usb/chipidea/core.c
> @@ -1313,6 +1313,29 @@ static void ci_controller_suspend(struct
> ci_hdrc *ci)
> enable_irq(ci->irq);
> }
>
> +/*
> + * Handle the wakeup interrupt triggered by extcon connector
> + * We need to call ci_irq again for extcon since the first
> + * interrupt (wakeup int) only let the controller be out of
> + * low power mode, but not handle any interrupts.
> + */
> +static void ci_extcon_wakeup_int(struct ci_hdrc *ci)
> +{
> + struct ci_hdrc_cable *cable_id, *cable_vbus;
> + u32 otgsc = hw_read_otgsc(ci, ~0);
> +
> + cable_id = &ci->platdata->id_extcon;
> + cable_vbus = &ci->platdata->vbus_extcon;
> +
> + if (!IS_ERR(cable_id->edev) && ci->is_otg &&
> + (otgsc & OTGSC_IDIE) && (otgsc & OTGSC_IDIS))
> + ci_irq(ci->irq, ci);
> +
> + if (!IS_ERR(cable_vbus->edev) && ci->is_otg &&
> + (otgsc & OTGSC_BSVIE) && (otgsc & OTGSC_BSVIS))
> + ci_irq(ci->irq, ci);
> +}
> +
> static int ci_controller_resume(struct device *dev)
> {
> struct ci_hdrc *ci = dev_get_drvdata(dev);
> @@ -1343,6 +1366,7 @@ static int ci_controller_resume(struct device
> *dev)
> enable_irq(ci->irq);
> if (ci_otg_is_fsm_mode(ci))
> ci_otg_fsm_wakeup_by_srp(ci);
> + ci_extcon_wakeup_int(ci);
> }
>
> return 0;

Thanks for creating this patch! I wanted also something like that, but
couldn't find out where to put it.

I tried this patch and with the above devicetree changes this works
perfectly! Thanks Peter!

Should I send the patch with you as the "Suggested-by" or do you want to
send the patch so you are the Author? I would have it ready in my git
repo.

>
> > This patch fixes that behaviour and lets the rest of the code check
> > if
> > something has to be done. If nothing has to be done the same return
> > value gets returned as before.
>
> Before the controller leaving low power mode, otgsc value may not
> correct since the controller/PHY is still in low power mode.
>
> > Fixes: 1f874edcb731 ("usb: chipidea: add runtime power management
> > support")
> > Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
> >
> > ---
> >
> > Hi Peter
> >
> > During my investigation I found a bug in ci_irq. I would appreciate
> > if you could review this. From what I see this patch should be save
> > to apply.
> >
> > This patch does not solve all of our issues. When I have RUNTIME_PM
> > enabled on imx6ull or imx7. RNDIS still does not come up. So there
> > has to be another bug hiding somewhere in the Runtime PM code to
> > prevent
> > RNDIS from working properly. I quickly looked through your patches
> > that added this stuff back in 2015 but couldn't spot anything
> > related to
> > usb gadget-mode.
> >
> > If you right away know where the problem could be hiding itself,
> > I would appreciate a hint.
> >
>
> I need information for call trace for further suggestion.
>
> Peter
>
> > ---
> >
> > drivers/usb/chipidea/core.c | 2 +-
> > 1 file changed, 1 insertion(+), 1 deletion(-)
> >
> > diff --git a/drivers/usb/chipidea/core.c
> > b/drivers/usb/chipidea/core.c
> > index 9a7c53d09ab4..5159420a23a4 100644
> > --- a/drivers/usb/chipidea/core.c
> > +++ b/drivers/usb/chipidea/core.c
> > @@ -518,7 +518,7 @@ static irqreturn_t ci_irq(int irq, void *data)
> > disable_irq_nosync(irq);
> > ci->wakeup_int = true;
> > pm_runtime_get(ci->dev);
> > - return IRQ_HANDLED;
> > + ret = IRQ_HANDLED;
> > }
> >
> > if (ci->is_otg) {
> > --
> > 2.27.0
> >
\
 
 \ /
  Last update: 2020-06-29 21:20    [W:0.139 / U:48.888 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site