lkml.org 
[lkml]   [2020]   [Jun]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: XHCI vs PCM2903B/PCM2904 part 2
From
Date
On Mon, 2020-06-29 at 23:21 -0400, Rik van Riel wrote:

> > Could you add the code below and take new traces, it will show the
> > endpoint
> > state after the Babble error.
>
> Hi Mathias,
>
> I have finally rebooted into a kernel with your tracepoint.
> After a babble error, I get the following info in the trace.
>
> [ 556.716334] xhci_hcd 0000:00:14.0: Babble error for slot 13 ep 8
> on
> endpoint
>
> 28672.016 :0/0 xhci-hcd:xhci_handle_tx_event(info: 196609, info2:
> 12845096, deq: 69501877488, tx_info: 12845252)
> 34816.037 :0/0 xhci-hcd:xhci_handle_tx_event(info: 196609, info2:
> 12845096, deq: 69501877856, tx_info: 12845252)
> 38912.043 :0/0 xhci-hcd:xhci_handle_tx_event(info: 196609, info2:
> 12845096, deq: 69501870176, tx_info: 12845252)

OK, this is strange indeed.
info: 0x30001
info2: 0xc40028
tx_info: c400c4

That suggests the device state is EP_STATE_DISABLED, but
we never got the error from the EP_STATE_DISABLED test near
the start of handle_tx_event(). If we had, the big switch
statement containing the code below would have been bypassed.

Unless I am mistaken, does that mean the endpoint context
(*ep_ctx) got modified while the code was in the middle of
handle_tx_event()?

What would cause that? A subsequent transfer to an endpoint
while it is in EP_STATE_HALTED, which the comment suggests
is the expected endpoint state for a babble error?

> > diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-
> > ring.c
> > index 0fda0c0f4d31..373d89ef7275 100644
> > --- a/drivers/usb/host/xhci-ring.c
> > +++ b/drivers/usb/host/xhci-ring.c
> > @@ -2455,6 +2455,7 @@ static int handle_tx_event(struct xhci_hcd
> > *xhci,
> > case COMP_BABBLE_DETECTED_ERROR:
> > xhci_dbg(xhci, "Babble error for slot %u ep %u on
> > endpoint\n",
> > slot_id, ep_index);
> > + trace_xhci_handle_tx_event(ep_ctx);
> > status = -EOVERFLOW;
> > break;
> > /* Completion codes for endpoint error state */
> > diff --git a/drivers/usb/host/xhci-trace.h b/drivers/usb/host/xhci-
> > trace.h
> > index b19582b2a72c..5081df079f4a 100644
> > --- a/drivers/usb/host/xhci-trace.h
> > +++ b/drivers/usb/host/xhci-trace.h
> > @@ -360,6 +360,11 @@ DEFINE_EVENT(xhci_log_ep_ctx,
> > xhci_add_endpoint,
> > TP_ARGS(ctx)
> > );
> >
> > +DEFINE_EVENT(xhci_log_ep_ctx, xhci_handle_tx_event,
> > + TP_PROTO(struct xhci_ep_ctx *ctx),
> > + TP_ARGS(ctx)
> > +);
> > +
> > DECLARE_EVENT_CLASS(xhci_log_slot_ctx,
> > TP_PROTO(struct xhci_slot_ctx *ctx),
> > TP_ARGS(ctx),
> >
> >
> >
--
All Rights Reversed.
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2020-06-30 05:56    [W:0.068 / U:0.396 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site