lkml.org 
[lkml]   [2020]   [Jun]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 02/13] clk: qcom: clk-alpha-pll: remove unused/incorrect PLL_CAL_VAL
Date
0x44 isn't a register offset, it is the value that goes into CAL_L_VAL.

Fixes: 548a909597d5 ("clk: qcom: clk-alpha-pll: Add support for Trion PLLs")

Signed-off-by: Jonathan Marek <jonathan@marek.ca>
---
drivers/clk/qcom/clk-alpha-pll.c | 2 --
1 file changed, 2 deletions(-)

diff --git a/drivers/clk/qcom/clk-alpha-pll.c b/drivers/clk/qcom/clk-alpha-pll.c
index 9b2dfa08acb2..1325139173c9 100644
--- a/drivers/clk/qcom/clk-alpha-pll.c
+++ b/drivers/clk/qcom/clk-alpha-pll.c
@@ -56,7 +56,6 @@
#define PLL_STATUS(p) ((p)->offset + (p)->regs[PLL_OFF_STATUS])
#define PLL_OPMODE(p) ((p)->offset + (p)->regs[PLL_OFF_OPMODE])
#define PLL_FRAC(p) ((p)->offset + (p)->regs[PLL_OFF_FRAC])
-#define PLL_CAL_VAL(p) ((p)->offset + (p)->regs[PLL_OFF_CAL_VAL])

const u8 clk_alpha_pll_regs[][PLL_OFF_MAX_REGS] = {
[CLK_ALPHA_PLL_TYPE_DEFAULT] = {
@@ -115,7 +114,6 @@ const u8 clk_alpha_pll_regs[][PLL_OFF_MAX_REGS] = {
[PLL_OFF_STATUS] = 0x30,
[PLL_OFF_OPMODE] = 0x38,
[PLL_OFF_ALPHA_VAL] = 0x40,
- [PLL_OFF_CAL_VAL] = 0x44,
},
[CLK_ALPHA_PLL_TYPE_LUCID] = {
[PLL_OFF_L_VAL] = 0x04,
--
2.26.1
\
 
 \ /
  Last update: 2020-06-30 00:10    [W:0.144 / U:2.852 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site