lkml.org 
[lkml]   [2020]   [Jun]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH RFC 1/5] dt-bindings: add binding for CDNSP-DRD controller
On Fri, 26 Jun 2020 06:54:46 +0200, Pawel Laszczak wrote:
> This patch aim at documenting USB related dt-bindings for the
> Cadence CDNSP-DRD controller.
>
> Signed-off-by: Pawel Laszczak <pawell@cadence.com>
> ---
> .../devicetree/bindings/usb/cdns-cdnsp.yaml | 104 ++++++++++++++++++
> 1 file changed, 104 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/usb/cdns-cdnsp.yaml
>


My bot found errors running 'make dt_binding_check' on your patch:

/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/usb/cdns-cdnsp.example.dt.yaml: example-0: usb@f3000000:reg:0: [0, 29437952, 0, 1024] is too long
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/usb/cdns-cdnsp.example.dt.yaml: example-0: usb@f3000000:reg:1: [0, 4076929024, 0, 65536] is too long
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/usb/cdns-cdnsp.example.dt.yaml: example-0: usb@f3000000:reg:2: [0, 4076994560, 0, 65536] is too long


See https://patchwork.ozlabs.org/patch/1317380

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure dt-schema is up to date:

pip3 install git+https://github.com/devicetree-org/dt-schema.git@master --upgrade

Please check and re-submit.

\
 
 \ /
  Last update: 2020-06-30 00:10    [W:0.194 / U:0.060 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site