lkml.org 
[lkml]   [2020]   [Jun]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH net-next v3 2/7] dt-bindings: net: add backplane dt bindings
On Mon, 22 Jun 2020 16:35:19 +0300, Florinel Iordache wrote:
> Add ethernet backplane device tree bindings
>
> Signed-off-by: Florinel Iordache <florinel.iordache@nxp.com>
> ---
> .../bindings/net/ethernet-controller.yaml | 7 ++-
> .../devicetree/bindings/net/ethernet-phy.yaml | 50 ++++++++++++++++++++++
> .../devicetree/bindings/net/serdes-lane.yaml | 49 +++++++++++++++++++++
> Documentation/devicetree/bindings/net/serdes.yaml | 42 ++++++++++++++++++
> 4 files changed, 146 insertions(+), 2 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/net/serdes-lane.yaml
> create mode 100644 Documentation/devicetree/bindings/net/serdes.yaml
>


My bot found errors running 'make dt_binding_check' on your patch:

/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/net/serdes.example.dt.yaml: example-0: serdes@1ea0000:reg:0: [0, 32112640, 0, 8192] is too long
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/net/serdes-lane.example.dt.yaml: example-0: serdes@1ea0000:reg:0: [0, 32112640, 0, 8192] is too long


See https://patchwork.ozlabs.org/patch/1314386

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure dt-schema is up to date:

pip3 install git+https://github.com/devicetree-org/dt-schema.git@master --upgrade

Please check and re-submit.

\
 
 \ /
  Last update: 2020-06-29 23:59    [W:0.165 / U:39.816 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site