lkml.org 
[lkml]   [2020]   [Jun]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v3] ASoC: Intel: kbl_rt5663_rt5514_max98927: Split be_hw_params_fixup function
Hi Harsha,

I've put the reason for this change in the commit message.
I had to split be_hw_params_fixup function for different codecs
because current approach (made for kernel 4.4) used in kernel 5.4,
leads to crash while trying to get snd_soc_dpcm with container_of()
macro in kabylake_ssp_fixup().
The crash call path looks as below:
soc_pcm_hw_params()
snd_soc_dai_hw_params(codec_dai, substream, &codec_params);
rtd->dai_link->be_hw_params_fixup(rtd, params)
kabylake_ssp_fixup()
In this case, codec_params is just a copy of an internal structure and is
not embedded into struct snd_soc_dpcm thus we cannot use
container_of() on it.

Best regards,
Lukasz

pon., 29 cze 2020 o 18:51 N, Harshapriya <harshapriya.n@intel.com> napisał(a):
>
> > -----Original Message-----
> > From: Łukasz Majczak <lma@semihalf.com>
> > Sent: Monday, June 29, 2020 4:11 AM
> > To: N, Harshapriya <harshapriya.n@intel.com>
> > Cc: alsa-devel@alsa-project.org; Pierre-Louis Bossart <pierre-
> > louis.bossart@linux.intel.com>; Jie Yang <yang.jie@linux.intel.com>; Radoslaw
> > Biernacki <rad@semihalf.com>; Ross Zwisler <zwisler@google.com>; linux-
> > kernel@vger.kernel.org; Liam Girdwood <liam.r.girdwood@linux.intel.com>;
> > Bob Brandt <brndt@google.com>; Marcin Wojtas <mw@semihalf.com>; Alex
> > Levin <levinale@chromium.org>
> > Subject: Re: [PATCH v3] ASoC: Intel: kbl_rt5663_rt5514_max98927: Split
> > be_hw_params_fixup function
> >
> > Hi Harsha,
> >
> > We would like to continue the work on this, could you please suggest the
> > correct approach.
> >
> > Best regards,
> > Lukasz
> >
> > czw., 21 maj 2020 o 20:10 Pierre-Louis Bossart <pierre-
> > louis.bossart@linux.intel.com> napisał(a):
> > >
> > >
> > >
> > > On 5/21/20 12:30 PM, Łukasz Majczak wrote:
> > > > Hi Pierre
> > > >
> > > > If you will take a look at the original kabylake_ssp_fixup() you
> > > > will see that it is checking whether the related FE is "Kbl Audio
> > > > Port", "Kbl Audio Headset Playback", "Kbl Audio Capture Port" or
> > > > "Kbl Audio DMIC cap" - then for the first 3 cases it sets min/max
> > > > channels to 2 while for the "Kbl DMIC cap" it can be 2 or 4, that's
> > > > is why I'm trying to split this, but maybe I'm missing here something.
> > >
> > > I don't understand this code either.
> > >
> > > I believe the intent is that for all SSP1-RT5663 usages, we should use
> > >
> > > rate->min = rate->max = 48000;
> > > chan->min = chan->max = 2;
> > > snd_mask_none(fmt);
> > > snd_mask_set_format(fmt, SNDRV_PCM_FORMAT_S24_LE);
> > >
> > > That is pretty easy to move to a dedicated ssp1 fixup.
> > >
> > > for SSP0, we have RT5514 for capture and max98927 for playback, but
> > > the existing code does not explicitly deal with rate/channels/format
> > > for all cases, so it's not clear what should happen.
> > >
> > > Harsha, can you help here?
> Apologies for missing the email I had to respond to.
>
> SSP0 - has the speakers
> SSP1 - has headset and dmic
> For speakers and headsets its 48Khz, 2 ch and 24 bit and this setting is done based on the front-end dai
> For speakers, however support only 16 bit, so we set it back to 16 bit
> If the front end dai is dmic, then the channel is set to either 2 or 4 dmic_constraints. No other formats need to be set.
>
> All the SSP1 usages do not have the same parameters (as dmic is on SSP1 and its different as given above)
> Most parameters are same for speakers and headset which are on different SSP. This is the reason we had a single fixup function.
>
> Is there a reason why the fixup function needs to be split?
>
> > >
> > > >
> > > > Best regards,
> > > > Lukasz
> > > >
> > > > czw., 21 maj 2020 o 19:17 Pierre-Louis Bossart
> > > > <pierre-louis.bossart@linux.intel.com> napisał(a):
> > > >>
> > > >>
> > > >>
> > > >> On 5/21/20 12:08 PM, Łukasz Majczak wrote:
> > > >>>>
> > > >>>> don't add a new dailink, this is not right.
> > > >>>>
> > > >>> Can you advise a better solution how to assign different fixup
> > > >>> functions to mic and to speakers? I was looking at "dmic01"
> > > >>> dailink in skl_nau88l25_max98357a.c as an example.
> > > >>
> > > >> I am not sure I follow. the DMICs are handled on a shared SSP, so
> > > >> how would one set a different fixup? The word length have to be the same.

\
 
 \ /
  Last update: 2020-06-29 23:47    [W:0.104 / U:0.576 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site