lkml.org 
[lkml]   [2020]   [Jun]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4/4] phy: ti-pipe3: remove set but unused variable
Date
ti_pipe3_power_on() sets variable 'ret' but never uses it, so remove it.

drivers/phy/ti/phy-ti-pipe3.c:340:6: warning: variable ‘ret’ set but not
used [-Wunused-but-set-variable]

Signed-off-by: Vinod Koul <vkoul@kernel.org>
---
drivers/phy/ti/phy-ti-pipe3.c | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/phy/ti/phy-ti-pipe3.c b/drivers/phy/ti/phy-ti-pipe3.c
index a87946589eb7..e9332c90f75f 100644
--- a/drivers/phy/ti/phy-ti-pipe3.c
+++ b/drivers/phy/ti/phy-ti-pipe3.c
@@ -337,7 +337,6 @@ static int ti_pipe3_power_on(struct phy *x)
{
u32 val;
u32 mask;
- int ret;
unsigned long rate;
struct ti_pipe3 *phy = phy_get_drvdata(x);
bool rx_pending = false;
@@ -355,8 +354,8 @@ static int ti_pipe3_power_on(struct phy *x)
rate = rate / 1000000;
mask = OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_FREQ_MASK;
val = rate << OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_FREQ_SHIFT;
- ret = regmap_update_bits(phy->phy_power_syscon, phy->power_reg,
- mask, val);
+ regmap_update_bits(phy->phy_power_syscon, phy->power_reg,
+ mask, val);
/*
* For PCIe, TX and RX must be powered on simultaneously.
* For USB and SATA, TX must be powered on before RX
--
2.26.2
\
 
 \ /
  Last update: 2020-06-29 23:31    [W:0.066 / U:7.288 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site