lkml.org 
[lkml]   [2020]   [Jun]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2 4/6] dt-bindings: reset: Add binding constants for Actions S500 RMU
From
Date
On Wed, 2020-06-24 at 20:47 +0300, Cristian Ciocaltea wrote:
> Add device tree binding constants for Actions Semi S500 SoC Reset
> Management Unit (RMU).
>
> Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@gmail.com>

Acked-by: Philipp Zabel <p.zabel@pengutronix.de>

to be merged through the clock tree, required by the following patch:
"clk: actions: Add Actions S500 SoC Reset Management Unit support".

regards
Philipp

> ---
> .../dt-bindings/reset/actions,s500-reset.h | 67 +++++++++++++++++++
> 1 file changed, 67 insertions(+)
> create mode 100644 include/dt-bindings/reset/actions,s500-reset.h
>
> diff --git a/include/dt-bindings/reset/actions,s500-reset.h b/include/dt-bindings/reset/actions,s500-reset.h
> new file mode 100644
> index 000000000000..f5d94176d10b
> --- /dev/null
> +++ b/include/dt-bindings/reset/actions,s500-reset.h
> @@ -0,0 +1,67 @@
> +/* SPDX-License-Identifier: GPL-2.0+ */
> +/*
> + * Device Tree binding constants for Actions Semi S500 Reset Management Unit
> + *
> + * Copyright (c) 2014 Actions Semi Inc.
> + * Copyright (c) 2020 Cristian Ciocaltea <cristian.ciocaltea@gmail.com>
> + */
> +
> +#ifndef __DT_BINDINGS_ACTIONS_S500_RESET_H
> +#define __DT_BINDINGS_ACTIONS_S500_RESET_H
> +
> +#define RESET_DMAC 0
> +#define RESET_NORIF 1
> +#define RESET_DDR 2
> +#define RESET_NANDC 3
> +#define RESET_SD0 4
> +#define RESET_SD1 5
> +#define RESET_PCM1 6
> +#define RESET_DE 7
> +#define RESET_LCD 8
> +#define RESET_SD2 9
> +#define RESET_DSI 10
> +#define RESET_CSI 11
> +#define RESET_BISP 12
> +#define RESET_KEY 13
> +#define RESET_GPIO 14
> +#define RESET_AUDIO 15
> +#define RESET_PCM0 16
> +#define RESET_VDE 17
> +#define RESET_VCE 18
> +#define RESET_GPU3D 19
> +#define RESET_NIC301 20
> +#define RESET_LENS 21
> +#define RESET_PERIPHRESET 22
> +#define RESET_USB2_0 23
> +#define RESET_TVOUT 24
> +#define RESET_HDMI 25
> +#define RESET_HDCP2TX 26
> +#define RESET_UART6 27
> +#define RESET_UART0 28
> +#define RESET_UART1 29
> +#define RESET_UART2 30
> +#define RESET_SPI0 31
> +#define RESET_SPI1 32
> +#define RESET_SPI2 33
> +#define RESET_SPI3 34
> +#define RESET_I2C0 35
> +#define RESET_I2C1 36
> +#define RESET_USB3 37
> +#define RESET_UART3 38
> +#define RESET_UART4 39
> +#define RESET_UART5 40
> +#define RESET_I2C2 41
> +#define RESET_I2C3 42
> +#define RESET_ETHERNET 43
> +#define RESET_CHIPID 44
> +#define RESET_USB2_1 45
> +#define RESET_WD0RESET 46
> +#define RESET_WD1RESET 47
> +#define RESET_WD2RESET 48
> +#define RESET_WD3RESET 49
> +#define RESET_DBG0RESET 50
> +#define RESET_DBG1RESET 51
> +#define RESET_DBG2RESET 52
> +#define RESET_DBG3RESET 53
> +
> +#endif /* __DT_BINDINGS_ACTIONS_S500_RESET_H */

\
 
 \ /
  Last update: 2020-06-26 14:15    [W:0.131 / U:0.624 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site