lkml.org 
[lkml]   [2020]   [Jun]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    From
    SubjectRe: [PATCH v7 00/12] Multiple fixes in PCIe qcom driver
    Date
    Hi Ansuel,

    Thank you for the patience.

    On 6/16/20 12:05 AM, Ansuel Smith wrote:
    > This contains multiple fix for PCIe qcom driver.
    > Some optional reset and clocks were missing.
    > Fix a problem with no PARF programming that cause kernel lock on load.
    > Add support to force gen 1 speed if needed. (due to hardware limitation)
    > Add ipq8064 rev 2 support that use a different tx termination offset.
    >
    > v7:
    > * Rework GEN1 patch
    >
    > v6:
    > * Replace custom define
    > * Move define not used in 07 to 08
    >
    > v5:
    > * Split PCI: qcom: Add ipq8064 rev2 variant and set tx term offset
    >
    > v4:
    > * Fix grammar error across all patch subject
    > * Use bulk api for clks
    > * Program PARF only in ipq8064 SoC
    > * Program tx term only in ipq8064 SoC
    > * Drop configurable tx-dempth rx-eq
    > * Make added clk optional
    >
    > v3:
    > * Fix check reported by checkpatch --strict
    > * Rename force_gen1 to gen
    >
    > v2:
    > * Drop iATU programming (already done in pcie init)
    > * Use max-link-speed instead of force-gen1 custom definition
    > * Drop MRRS to 256B (Can't find a realy reason why this was suggested)
    > * Introduce a new variant for different revision of ipq8064
    >
    > Abhishek Sahu (1):
    > PCI: qcom: Change duplicate PCI reset to phy reset
    >
    > Ansuel Smith (10):
    > PCI: qcom: Add missing ipq806x clocks in PCIe driver
    > dt-bindings: PCI: qcom: Add missing clks
    > PCI: qcom: Add missing reset for ipq806x
    > dt-bindings: PCI: qcom: Add ext reset
    > PCI: qcom: Use bulk clk api and assert on error
    > PCI: qcom: Define some PARF params needed for ipq8064 SoC
    > PCI: qcom: Add support for tx term offset for rev 2.1.0
    > PCI: qcom: Add ipq8064 rev2 variant
    > dt-bindings: PCI: qcom: Add ipq8064 rev 2 variant
    > PCI: qcom: Replace define with standard value
    >
    > Sham Muthayyan (1):
    > PCI: qcom: Support pci speed set for ipq806x
    >
    > .../devicetree/bindings/pci/qcom,pcie.txt | 15 +-
    > drivers/pci/controller/dwc/pcie-qcom.c | 186 +++++++++++-------
    > 2 files changed, 128 insertions(+), 73 deletions(-)
    >

    For the whole set:

    Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>

    --
    regards,
    Stan

    \
     
     \ /
      Last update: 2020-06-26 01:38    [W:2.788 / U:0.016 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site