Messages in this thread | | | From | Fabio Estevam <> | Date | Tue, 23 Jun 2020 11:19:25 -0300 | Subject | Re: [PATCH v1] ARM: imx6plus: enable internal routing of clk_enet_ref where possible |
| |
Hi Sven,
On Sat, Jun 13, 2020 at 5:17 PM Sven Van Asbroeck <thesven73@gmail.com> wrote:
> + /* > + * On imx6 plus, enet_ref from ANATOP/CCM can be internally routed to > + * be the PTP clock source, instead of having to be routed through > + * pads. > + * Board designs which route the ANATOP/CCM clock through pads are > + * unaffected when routing happens internally. So on these designs, > + * route internally by default. > + */ > + if (clksel == IMX6Q_GPR1_ENET_CLK_SEL_ANATOP && cpu_is_imx6q() && > + imx_get_soc_revision() >= IMX_CHIP_REVISION_2_0) {
You should limit this to imx6 quad plus only, so you would better check against "fsl,imx6qp".
| |