lkml.org 
[lkml]   [2020]   [Jun]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: brocken devfreq simple_ondemand for Odroid XU3/4?
On Tue, Jun 23, 2020 at 09:02:38PM +0200, Krzysztof Kozlowski wrote:
> On Tue, 23 Jun 2020 at 18:47, Willy Wolff <willy.mh.wolff.ml@gmail.com> wrote:
> >
> > Hi everybody,
> >
> > Is DVFS for memory bus really working on Odroid XU3/4 board?
> > Using a simple microbenchmark that is doing only memory accesses, memory DVFS
> > seems to not working properly:
> >
> > The microbenchmark is doing pointer chasing by following index in an array.
> > Indices in the array are set to follow a random pattern (cutting prefetcher),
> > and forcing RAM access.
> >
> > git clone https://github.com/wwilly/benchmark.git \
> > && cd benchmark \
> > && source env.sh \
> > && ./bench_build.sh \
> > && bash source/scripts/test_dvfs_mem.sh
> >
> > Python 3, cmake and sudo rights are required.
> >
> > Results:
> > DVFS CPU with performance governor
> > mem_gov = simple_ondemand at 165000000 Hz in idle, should be bumped when the
> > benchmark is running.
> > - on the LITTLE cluster it takes 4.74308 s to run (683.004 c per memory access),
> > - on the big cluster it takes 4.76556 s to run (980.343 c per moemory access).
> >
> > While forcing DVFS memory bus to use performance governor,
> > mem_gov = performance at 825000000 Hz in idle,
> > - on the LITTLE cluster it takes 1.1451 s to run (164.894 c per memory access),
> > - on the big cluster it takes 1.18448 s to run (243.664 c per memory access).
> >
> > The kernel used is the last 5.7.5 stable with default exynos_defconfig.
>
> Thanks for the report. Few thoughts:
> 1. What trans_stat are saying? Except DMC driver you can also check
> all other devfreq devices (e.g. wcore) - maybe the devfreq events
> (nocp) are not properly assigned?
> 2. Try running the measurement for ~1 minutes or longer. The counters
> might have some delay (which would require probably fixing but the
> point is to narrow the problem).
> 3. What do you understand by "mem_gov"? Which device is it?

+Cc Lukasz who was working on this.

I just run memtester and more-or-less ondemand works (at least ramps
up):

Before:
/sys/class/devfreq/10c20000.memory-controller$ cat trans_stat
From : To
: 165000000 206000000 275000000 413000000 543000000 633000000 728000000 825000000 time(ms)
* 165000000: 0 0 0 0 0 0 0 0 1795950
206000000: 1 0 0 0 0 0 0 0 4770
275000000: 0 1 0 0 0 0 0 0 15540
413000000: 0 0 1 0 0 0 0 0 20780
543000000: 0 0 0 1 0 0 0 1 10760
633000000: 0 0 0 0 2 0 0 0 10310
728000000: 0 0 0 0 0 0 0 0 0
825000000: 0 0 0 0 0 2 0 0 25920
Total transition : 9


$ sudo memtester 1G

During memtester:
/sys/class/devfreq/10c20000.memory-controller$ cat trans_stat
From : To
: 165000000 206000000 275000000 413000000 543000000 633000000 728000000 825000000 time(ms)
165000000: 0 0 0 0 0 0 0 1 1801490
206000000: 1 0 0 0 0 0 0 0 4770
275000000: 0 1 0 0 0 0 0 0 15540
413000000: 0 0 1 0 0 0 0 0 20780
543000000: 0 0 0 1 0 0 0 2 11090
633000000: 0 0 0 0 3 0 0 0 17210
728000000: 0 0 0 0 0 0 0 0 0
* 825000000: 0 0 0 0 0 3 0 0 169020
Total transition : 13

However after killing memtester it stays at 633 MHz for very long time
and does not slow down. This is indeed weird...

Best regards,
Krzysztof

\
 
 \ /
  Last update: 2020-06-23 21:12    [W:0.085 / U:1.372 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site