Messages in this thread Patch in this message | | | From | Konrad Dybcio <> | Subject | [PATCH 19/21] arm64: dts: qcom: angler: Add qcom,msm-id and pmic-id | Date | Sat, 20 Jun 2020 16:46:35 +0200 |
| |
Add properties required for the bootloader to select the correct bootloader blob. They have been removed from the SoC device tree as they should be set on a per-device basis.
Signed-off-by: Konrad Dybcio <konradybcio@gmail.com> --- arch/arm64/boot/dts/qcom/msm8994-angler-rev-101.dts | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/msm8994-angler-rev-101.dts b/arch/arm64/boot/dts/qcom/msm8994-angler-rev-101.dts index a5f9a6ab512c..baa55643b40f 100644 --- a/arch/arm64/boot/dts/qcom/msm8994-angler-rev-101.dts +++ b/arch/arm64/boot/dts/qcom/msm8994-angler-rev-101.dts @@ -11,6 +11,8 @@ / { model = "Huawei Nexus 6P"; compatible = "huawei,angler", "qcom,msm8994"; /* required for bootloader to select correct board */ + qcom,msm-id = <207 0x20000>; + qcom,pmic-id = <0x10009 0x1000A 0x0 0x0>; qcom,board-id = <8026 0>; aliases { -- 2.27.0
| |