lkml.org 
[lkml]   [2020]   [Jun]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v4 4/5] regulator: qcom: Add labibb driver
Hi Mark,

Thank you very much for reviewing.


On Tue, 2 Jun 2020 at 17:02, Mark Brown <broonie@kernel.org> wrote:
>
> On Tue, Jun 02, 2020 at 03:39:23PM +0530, Sumit Semwal wrote:
>
> > +static int qcom_labibb_regulator_is_enabled(struct regulator_dev *rdev)
> > +{
> > + int ret;
> > + unsigned int val;
> > + struct labibb_regulator *reg = rdev_get_drvdata(rdev);
> > +
> > + ret = regmap_read(reg->regmap, reg->base + REG_LABIBB_STATUS1, &val);
> > + if (ret < 0) {
> > + dev_err(reg->dev, "Read register failed ret = %d\n", ret);
> > + return ret;
> > + }
> > + return !!(val & LABIBB_STATUS1_VREG_OK_BIT);
> > +}
>
> This should be a get_status() callback...
>
From my (limited) understanding of downstream code, it seemed like for
this set of regulators, the 'enabled' check is done via the
'REG_LABIBB_STATUS1 reg; for some reason, not via the same enable_reg
/ enable_mask ones. That's why I used it as is_enabled() callback.
I will try and check with the QC folks to clarify this point about
their hardware.

> > +static int qcom_labibb_regulator_enable(struct regulator_dev *rdev)
> > +{
> > + return regulator_enable_regmap(rdev);
> > +}
> > +
> > +static int qcom_labibb_regulator_disable(struct regulator_dev *rdev)
> > +{
> > + return regulator_disable_regmap(rdev);
> > +}
>
> ...is_enabled() should just be regulator_is_enabled_regmap() and these
> functions should just be removed entirely, you can use the regmap
> operations directly as the ops without the wrapper.

The 2 wrappers are a precursor to the next patch, where we keep track
of regulator's enable status to check during SC handling.
>
> > + match = of_match_device(qcom_labibb_match, &pdev->dev);
> > + if (!match)
> > + return -ENODEV;
> > +
> > + for (reg_data = match->data; reg_data->name; reg_data++) {
> > + child = of_get_child_by_name(pdev->dev.of_node, reg_data->name);
> > +
> > + if (WARN_ON(child == NULL))
> > + return -EINVAL;
>
> This feels like the DT bindings are confused - why do we need to search
> like this?
The WARN_ON? This was suggested by Bjorn to catch the case where the
DT binding for a PMIC instantiates only one of the regulators.
>
> > + dev_info(dev, "Registering %s regulator\n", child->full_name);
>
> This is noise, remove it. The regulator framework will announce new
> regulators anyway.
Agreed. will remove in the next iteration.

Best,
Sumit.

\
 
 \ /
  Last update: 2020-06-02 14:11    [W:0.075 / U:2.044 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site