lkml.org 
[lkml]   [2020]   [Jun]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH 0/3] Add support for Ingenic X1830 SoC and Y&A CU1830-Neo board.
Date
1.Add support for Ingenic X1830 SoC.
2.Add support for CU1830-Neo development board. CU1830-Neo is a development
board using Ingenic X1830 SoC. It comes with 128MiB of RAM.

周琰杰 (Zhou Yanjie) (3):
MIPS: Ingenic: Add Ingenic X1830 support.
dt-bindings: MIPS: Add Ingenic X1830 based boards.
MIPS: Ingenic: Add YSH & ATIL CU Neo board support.

.../devicetree/bindings/mips/ingenic/devices.yaml | 12 +-
arch/mips/boot/dts/ingenic/Makefile | 1 +
arch/mips/boot/dts/ingenic/cu1830-neo.dts | 160 +++++++++++
arch/mips/boot/dts/ingenic/x1830.dtsi | 299 +++++++++++++++++++++
arch/mips/configs/cu1830-neo_defconfig | 119 ++++++++
arch/mips/jz4740/Kconfig | 10 +
6 files changed, 598 insertions(+), 3 deletions(-)
create mode 100644 arch/mips/boot/dts/ingenic/cu1830-neo.dts
create mode 100755 arch/mips/boot/dts/ingenic/x1830.dtsi
create mode 100644 arch/mips/configs/cu1830-neo_defconfig

--
2.11.0



\
 
 \ /
  Last update: 2020-06-20 00:15    [W:0.056 / U:0.168 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site