Messages in this thread | | | Date | Fri, 19 Jun 2020 16:39:06 +0200 | From | Sebastian Reichel <> | Subject | Re: [PATCH 2/2] dt-bindings: power: supply: bq25890: Document required interrupt |
| |
Hi,
On Wed, Jun 17, 2020 at 12:23:05PM +0200, Krzysztof Kozlowski wrote: > The driver requires interrupts (fails probe if it is not provided) so > document this requirement in bindings. > > Fixes: 4aeae9cb0dad ("power_supply: Add support for TI BQ25890 charger chip") > Cc: <stable@vger.kernel.org> > Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> > ---
Thanks, queued.
-- Sebastian
> Documentation/devicetree/bindings/power/supply/bq25890.txt | 4 ++++ > 1 file changed, 4 insertions(+) > > diff --git a/Documentation/devicetree/bindings/power/supply/bq25890.txt b/Documentation/devicetree/bindings/power/supply/bq25890.txt > index 51ecc756521f..3b4c69a7fa70 100644 > --- a/Documentation/devicetree/bindings/power/supply/bq25890.txt > +++ b/Documentation/devicetree/bindings/power/supply/bq25890.txt > @@ -10,6 +10,7 @@ Required properties: > * "ti,bq25895" > * "ti,bq25896" > - reg: integer, i2c address of the device. > +- interrupts: interrupt line; > - ti,battery-regulation-voltage: integer, maximum charging voltage (in uV); > - ti,charge-current: integer, maximum charging current (in uA); > - ti,termination-current: integer, charge will be terminated when current in > @@ -39,6 +40,9 @@ bq25890 { > compatible = "ti,bq25890"; > reg = <0x6a>; > > + interrupt-parent = <&gpio1>; > + interrupts = <16 IRQ_TYPE_EDGE_FALLING>; > + > ti,battery-regulation-voltage = <4200000>; > ti,charge-current = <1000000>; > ti,termination-current = <50000>; > -- > 2.17.1 > [unhandled content-type:application/pgp-signature] | |