lkml.org 
[lkml]   [2020]   [Jun]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v15 06/11] soc: mediatek: Add subsys clock control for bus protection
From
Date
On Thu, 2020-06-04 at 10:29 +0800, Nicolas Boichat wrote:
> On Thu, May 21, 2020 at 5:06 PM Weiyi Lu <weiyi.lu@mediatek.com> wrote:
> >
> > For the bus protection operations, some subsys clocks need to be enabled
> > before releasing the protection, and vice versa.
> > But those subsys clocks could only be controlled once its corresponding
> > power domain is turned on first.
> > In this patch, we add the subsys clock control into its relevant steps.
> >
> > Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
> > ---
> > drivers/soc/mediatek/mtk-scpsys.c | 62 +++++++++++++++++++++++++++++++++++++--
> > 1 file changed, 60 insertions(+), 2 deletions(-)
> >
> > diff --git a/drivers/soc/mediatek/mtk-scpsys.c b/drivers/soc/mediatek/mtk-scpsys.c
> > index 59a525a..ef2c668 100644
> > --- a/drivers/soc/mediatek/mtk-scpsys.c
> > +++ b/drivers/soc/mediatek/mtk-scpsys.c
> > [snip]
> > val |= PWR_ISO_BIT;
> > @@ -498,6 +511,39 @@ static int scpsys_power_off(struct generic_pm_domain *genpd)
> > return ret;
> > }
> >
> > +static int init_subsys_clks(struct platform_device *pdev,
> > + const char *prefix, struct clk **clk)
> > +{
> > + struct device_node *node = pdev->dev.of_node;
> > + u32 prefix_len, sub_clk_cnt = 0;
> > + struct property *prop;
> > + const char *clk_name;
> > +
> > + prefix_len = strlen(prefix);
> > +
> > + of_property_for_each_string(node, "clock-names", prop, clk_name) {
> > + if (!strncmp(clk_name, prefix, prefix_len) &&
> > + (clk_name[prefix_len] == '-')) {
> > + if (sub_clk_cnt >= MAX_SUBSYS_CLKS) {
> > + dev_err(&pdev->dev,
> > + "subsys clk out of range %d\n",
> > + sub_clk_cnt);
> > + return -EINVAL;
> > + }
> > +
> > + clk[sub_clk_cnt] = devm_clk_get(&pdev->dev,
> > + clk_name);
> > +
> > + if (IS_ERR(clk[sub_clk_cnt]))
> > + return PTR_ERR(clk[sub_clk_cnt]);
> > +
> > + sub_clk_cnt++;
> > + }
> > + }
> > +
> > + return sub_clk_cnt;
> > +}
> > +
> > static int init_basic_clks(struct platform_device *pdev, struct clk **clk,
> > const char * const *name)
> > {
> > @@ -596,6 +642,18 @@ static struct scp *init_scp(struct platform_device *pdev,
> > if (ret)
> > return ERR_PTR(ret);
> >
> > + if (data->subsys_clk_prefix) {
> > + ret = init_subsys_clks(pdev,
> > + data->subsys_clk_prefix,
> > + scpd->subsys_clk);
> > + if (ret < 0) {
> > + dev_err(&pdev->dev,
> > + "%s: subsys clk unavailable\n",
> > + data->name);
>
> init_subsys_clks should already have printed an error (directly or
> indirectly), so this is not needed.
>

You're right. I'll remove it in next version v16.

> > + return ERR_PTR(ret);
> > + }
> > + }
> > +
> > genpd->name = data->name;
> > genpd->power_off = scpsys_power_off;
> > genpd->power_on = scpsys_power_on;
> > --
> > 1.8.1.1.dirty

\
 
 \ /
  Last update: 2020-06-17 08:41    [W:0.059 / U:0.208 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site