lkml.org 
[lkml]   [2020]   [Jun]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v4 17/27] clk: bcm: rpi: Split pllb clock hooks
Date
The driver only supports the pllb for now and all the clock framework hooks
are a mix of the generic firmware interface and the specifics of the pllb.
Since we will support more clocks in the future let's split the generic and
specific hooks

Cc: Michael Turquette <mturquette@baylibre.com>
Cc: linux-clk@vger.kernel.org
Acked-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
drivers/clk/bcm/clk-raspberrypi.c | 30 ++++++++++++++++++++++--------
1 file changed, 22 insertions(+), 8 deletions(-)

diff --git a/drivers/clk/bcm/clk-raspberrypi.c b/drivers/clk/bcm/clk-raspberrypi.c
index 58ac1b104429..19571602ba64 100644
--- a/drivers/clk/bcm/clk-raspberrypi.c
+++ b/drivers/clk/bcm/clk-raspberrypi.c
@@ -102,8 +102,8 @@ static int raspberrypi_fw_is_prepared(struct clk_hw *hw)
}


-static unsigned long raspberrypi_fw_pll_get_rate(struct clk_hw *hw,
- unsigned long parent_rate)
+static unsigned long raspberrypi_fw_get_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
{
struct raspberrypi_clk_data *data =
container_of(hw, struct raspberrypi_clk_data, hw);
@@ -116,21 +116,27 @@ static unsigned long raspberrypi_fw_pll_get_rate(struct clk_hw *hw,
if (ret)
return ret;

- return val * RPI_FIRMWARE_PLLB_ARM_DIV_RATE;
+ return val;
}

-static int raspberrypi_fw_pll_set_rate(struct clk_hw *hw, unsigned long rate,
- unsigned long parent_rate)
+static unsigned long raspberrypi_fw_pll_get_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ return raspberrypi_fw_get_rate(hw, parent_rate) *
+ RPI_FIRMWARE_PLLB_ARM_DIV_RATE;
+}
+
+static int raspberrypi_fw_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
{
struct raspberrypi_clk_data *data =
container_of(hw, struct raspberrypi_clk_data, hw);
struct raspberrypi_clk *rpi = data->rpi;
- u32 new_rate = rate / RPI_FIRMWARE_PLLB_ARM_DIV_RATE;
+ u32 _rate = rate;
int ret;

ret = raspberrypi_clock_property(rpi->firmware, data,
- RPI_FIRMWARE_SET_CLOCK_RATE,
- &new_rate);
+ RPI_FIRMWARE_SET_CLOCK_RATE, &_rate);
if (ret)
dev_err_ratelimited(rpi->dev, "Failed to change %s frequency: %d",
clk_hw_get_name(hw), ret);
@@ -138,6 +144,14 @@ static int raspberrypi_fw_pll_set_rate(struct clk_hw *hw, unsigned long rate,
return ret;
}

+static int raspberrypi_fw_pll_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ u32 new_rate = rate / RPI_FIRMWARE_PLLB_ARM_DIV_RATE;
+
+ return raspberrypi_fw_set_rate(hw, new_rate, parent_rate);
+}
+
/*
* Sadly there is no firmware rate rounding interface. We borrowed it from
* clk-bcm2835.
--
git-series 0.9.1
\
 
 \ /
  Last update: 2020-06-11 09:33    [W:0.118 / U:1.200 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site