lkml.org 
[lkml]   [2020]   [Jun]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v2] devres: keep both device name and resource name in pretty name
On Mon, Jun 1, 2020 at 12:13 AM Vladimir Oltean <olteanv@gmail.com> wrote:
> On Mon, 1 Jun 2020 at 00:05, Andy Shevchenko <andy.shevchenko@gmail.com> wrote:
> > On Sunday, May 31, 2020, Vladimir Oltean <olteanv@gmail.com> wrote:

> >> Sometimes debugging a device is easiest using devmem on its register
> >> map, and that can be seen with /proc/iomem. But some device drivers have
> >> many memory regions. Take for example a networking switch. Its memory
> >> map used to look like this in /proc/iomem:
> >>
> >> 1fc000000-1fc3fffff : pcie@1f0000000
> >> 1fc000000-1fc3fffff : 0000:00:00.5
> >> 1fc010000-1fc01ffff : sys
> >> 1fc030000-1fc03ffff : rew
> >> 1fc060000-1fc0603ff : s2
> >> 1fc070000-1fc0701ff : devcpu_gcb
> >> 1fc080000-1fc0800ff : qs
> >> 1fc090000-1fc0900cb : ptp
> >> 1fc100000-1fc10ffff : port0
> >> 1fc110000-1fc11ffff : port1
> >> 1fc120000-1fc12ffff : port2
> >> 1fc130000-1fc13ffff : port3
> >> 1fc140000-1fc14ffff : port4
> >> 1fc150000-1fc15ffff : port5
> >> 1fc200000-1fc21ffff : qsys
> >> 1fc280000-1fc28ffff : ana
> >>
> >> But after the patch in Fixes: was applied, the information is now
> >> presented in a much more opaque way:
> >>
> >> 1fc000000-1fc3fffff : pcie@1f0000000
> >> 1fc000000-1fc3fffff : 0000:00:00.5
> >> 1fc010000-1fc01ffff : 0000:00:00.5
> >> 1fc030000-1fc03ffff : 0000:00:00.5
> >> 1fc060000-1fc0603ff : 0000:00:00.5
> >> 1fc070000-1fc0701ff : 0000:00:00.5
> >> 1fc080000-1fc0800ff : 0000:00:00.5
> >> 1fc090000-1fc0900cb : 0000:00:00.5
> >> 1fc100000-1fc10ffff : 0000:00:00.5
> >> 1fc110000-1fc11ffff : 0000:00:00.5
> >> 1fc120000-1fc12ffff : 0000:00:00.5
> >> 1fc130000-1fc13ffff : 0000:00:00.5
> >> 1fc140000-1fc14ffff : 0000:00:00.5
> >> 1fc150000-1fc15ffff : 0000:00:00.5
> >> 1fc200000-1fc21ffff : 0000:00:00.5
> >> 1fc280000-1fc28ffff : 0000:00:00.5
> >>
> >> That patch made a fair comment that /proc/iomem might be confusing when
> >> it shows resources without an associated device, but we can do better
> >> than just hide the resource name altogether. Namely, we can print the
> >> device name _and_ the resource name. Like this:
> >>
> >> 1fc000000-1fc3fffff : pcie@1f0000000
> >> 1fc000000-1fc3fffff : 0000:00:00.5
> >> 1fc010000-1fc01ffff : 0000:00:00.5 sys
> >> 1fc030000-1fc03ffff : 0000:00:00.5 rew
> >> 1fc060000-1fc0603ff : 0000:00:00.5 s2
> >> 1fc070000-1fc0701ff : 0000:00:00.5 devcpu_gcb
> >> 1fc080000-1fc0800ff : 0000:00:00.5 qs
> >> 1fc090000-1fc0900cb : 0000:00:00.5 ptp
> >> 1fc100000-1fc10ffff : 0000:00:00.5 port0
> >> 1fc110000-1fc11ffff : 0000:00:00.5 port1
> >> 1fc120000-1fc12ffff : 0000:00:00.5 port2
> >> 1fc130000-1fc13ffff : 0000:00:00.5 port3
> >> 1fc140000-1fc14ffff : 0000:00:00.5 port4
> >> 1fc150000-1fc15ffff : 0000:00:00.5 port5
> >> 1fc200000-1fc21ffff : 0000:00:00.5 qsys
> >> 1fc280000-1fc28ffff : 0000:00:00.5 ana

> > All of this seems an ABI change.

> Yes, indeed. What should I understand from your comment though?

You effectively break an ABI.

--
With Best Regards,
Andy Shevchenko

\
 
 \ /
  Last update: 2020-06-01 12:40    [W:0.084 / U:0.052 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site