lkml.org 
[lkml]   [2020]   [May]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v8 2/4] firmware: raspberrypi: Introduce vl805 init routine
From
Date
Am 09.05.20 um 12:02 schrieb Stefan Wahren:
> Hi Nicolas,
>
> Am 07.05.20 um 23:48 schrieb Rob Herring:
>> On Tue, 5 May 2020 18:13:15 +0200, Nicolas Saenz Julienne wrote:
>>> The Raspberry Pi 4 gets its USB functionality from VL805, a PCIe chip
>>> that implements xHCI. After a PCI reset, VL805's firmware may either be
>>> loaded directly from an EEPROM or, if not present, by the SoC's
>>> co-processor, VideoCore. RPi4's VideoCore OS contains both the non public
>>> firmware load logic and the VL805 firmware blob. The function this patch
>>> introduces triggers the aforementioned process.
>>>
>>> Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
>>>
>>> ---
>>>
>>> Change since v7:
>>> - Use usleep_delay()
>>> - Add comment about PCI errors
>>> - Don't wait on error
>>> - Typos
>>>
>>> Change since v6:
>>> - Add test to avoid loading the firmware when not needed
>>> - Since we have it around, print VL805's firmware version, it'll make
>>> debugging easier in the future
>>> - Correct typos
>>> - Add a clearer view of HW topology in patch description
>>>
>>> Changes since v4:
>>> - Inline function definition when RASPBERRYPI_FIRMWARE is not defined
>>>
>>> Changes since v1:
>>> - Move include into .c file and add forward declaration to .h
>>>
>>> drivers/firmware/raspberrypi.c | 61 ++++++++++++++++++++++
>>> include/soc/bcm2835/raspberrypi-firmware.h | 7 +++
>>> 2 files changed, 68 insertions(+)
>>>
>> Reviewed-by: Rob Herring <robh@kernel.org>
> i modified the code a little bit for testing, but also successfully
> tested it without my modifications:
>
> diff --git a/drivers/firmware/raspberrypi.c b/drivers/firmware/raspberrypi.c
> index 0d1422b..f3f4c2d 100644
> --- a/drivers/firmware/raspberrypi.c
> +++ b/drivers/firmware/raspberrypi.c
> @@ -337,8 +337,10 @@ int rpi_firmware_init_vl805(struct pci_dev *pdev)
>          * further down the line.
>          */
>         pci_read_config_dword(pdev, VL805_PCI_CONFIG_VERSION_OFFSET,
> &version);
> -       if (version)
> -               goto exit;
> +       if (version) {
> +               pci_info(pdev, "VL805 EEPROM firmware version %08x\n",
> version);
> +               return 0;
> +       }
>  
>         dev_addr = pdev->bus->number << 20 | PCI_SLOT(pdev->devfn) << 15 |
>                    PCI_FUNC(pdev->devfn) << 12;
> @@ -353,9 +355,8 @@ int rpi_firmware_init_vl805(struct pci_dev *pdev)
>  
>         pci_read_config_dword(pdev, VL805_PCI_CONFIG_VERSION_OFFSET,
>                               &version);
> -exit:
> -       pci_info(pdev, "VL805 firmware version %08x\n", version);
>  
> +       pci_info(pdev, "VL805 RAM firmware version %08x\n", version);
>         return 0;
>  }
>  EXPORT_SYMBOL_GPL(rpi_firmware_init_vl805);
>
> Here are the my results with 3x Raspberry Pi 4:
>
> VL805 EEPROM firmware version 000137ad
> VL805 EEPROM firmware version 00013701
> VL805 RAM firmware version 000137ad
>
> So the whole patch series is:
>
> Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
>
Sorry, for sending from the wrong address:

Tested-by: Stefan Wahren <stefan.wahren@i2se.com>

\
 
 \ /
  Last update: 2020-05-09 12:11    [W:0.085 / U:0.280 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site