lkml.org 
[lkml]   [2020]   [May]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH net-next 5/5] net: hns3: disable auto-negotiation off with 1000M setting in ethtool
Date
From: Yufeng Mo <moyufeng@huawei.com>

The 802.3 specification does not specify the behavior of
auto-negotiation off with 1000M in PHY. Therefore, some PHY
compatibility issues occur. This patch forbids the setting of
this unreasonable mode by ethtool in driver.

Signed-off-by: Yufeng Mo <moyufeng@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
---
drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c b/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c
index 1a105f2..6b1545f 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c
@@ -773,8 +773,13 @@ static int hns3_set_link_ksettings(struct net_device *netdev,
cmd->base.autoneg, cmd->base.speed, cmd->base.duplex);

/* Only support ksettings_set for netdev with phy attached for now */
- if (netdev->phydev)
+ if (netdev->phydev) {
+ if (cmd->base.speed == SPEED_1000 &&
+ cmd->base.autoneg == AUTONEG_DISABLE)
+ return -EINVAL;
+
return phy_ethtool_ksettings_set(netdev->phydev, cmd);
+ }

if (handle->pdev->revision == 0x20)
return -EOPNOTSUPP;
--
2.7.4
\
 
 \ /
  Last update: 2020-05-09 11:29    [W:0.077 / U:23.912 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site