lkml.org 
[lkml]   [2020]   [May]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH 4.4 039/312] ARM: dts: kirkwood: gpio-leds fixes for linkstation ls-wvl/vl
    Date
    From: Roger Shimizu <rogershimizu@gmail.com>

    commit 0418138e2ffd90f4a00b263593f2e199db87321d upstream.

    The GPIOs controlling the LEDs, listed below, are active high, not low:
    - gpio-leds: "lswvl:red:alarm" pin
    - gpio-leds: "lswvl:red:func" pin
    - gpio-leds: "lswvl:amber:info" pin
    - gpio-leds: "lswvl:blue:func" pin
    - gpio-leds: "lswvl:red:hdderr{0,1}" pin

    Fixes: c43379e150aa ("ARM: dts: add buffalo linkstation ls-wvl/vl")
    Signed-off-by: Roger Shimizu <rogershimizu@gmail.com>
    Reviewed-by: Andrew Lunn <andrew@lunn.ch>
    Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
    Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

    ---
    arch/arm/boot/dts/kirkwood-lswvl.dts | 12 ++++++------
    1 file changed, 6 insertions(+), 6 deletions(-)

    --- a/arch/arm/boot/dts/kirkwood-lswvl.dts
    +++ b/arch/arm/boot/dts/kirkwood-lswvl.dts
    @@ -186,22 +186,22 @@

    led@1 {
    label = "lswvl:red:alarm";
    - gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
    + gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
    };

    led@2 {
    label = "lswvl:red:func";
    - gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
    + gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
    };

    led@3 {
    label = "lswvl:amber:info";
    - gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
    + gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
    };

    led@4 {
    label = "lswvl:blue:func";
    - gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
    + gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
    };

    led@5 {
    @@ -212,12 +212,12 @@

    led@6 {
    label = "lswvl:red:hdderr0";
    - gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
    + gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
    };

    led@7 {
    label = "lswvl:red:hdderr1";
    - gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
    + gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
    };
    };


    \
     
     \ /
      Last update: 2020-05-08 15:10    [W:2.347 / U:0.648 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site