lkml.org 
[lkml]   [2020]   [May]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 5/5] drm/panel: add panel driver for Ilitek ili9341 panels
Date
From: dillon min <dillon.minfei@gmail.com>

This is a driver for 320x240 TFT panels, accepting a rgb input
streams that get adapted and scaled to the panel.

Signed-off-by: dillon min <dillon.minfei@gmail.com>
---
drivers/gpu/drm/panel/Kconfig | 8 +
drivers/gpu/drm/panel/Makefile | 1 +
drivers/gpu/drm/panel/panel-ilitek-ili9341.c | 561 +++++++++++++++++++++++++++
3 files changed, 570 insertions(+)
create mode 100644 drivers/gpu/drm/panel/panel-ilitek-ili9341.c

diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
index a1723c1..e42692c 100644
--- a/drivers/gpu/drm/panel/Kconfig
+++ b/drivers/gpu/drm/panel/Kconfig
@@ -95,6 +95,14 @@ config DRM_PANEL_ILITEK_IL9322
Say Y here if you want to enable support for Ilitek IL9322
QVGA (320x240) RGB, YUV and ITU-T BT.656 panels.

+config DRM_PANEL_ILITEK_IL9341
+ tristate "Ilitek ILI9341 240x320 QVGA panels"
+ depends on OF && SPI
+ select REGMAP
+ help
+ Say Y here if you want to enable support for Ilitek IL9341
+ QVGA (240x320) RGB panels.
+
config DRM_PANEL_ILITEK_ILI9881C
tristate "Ilitek ILI9881C-based panels"
depends on OF
diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile
index 96a883c..d123543 100644
--- a/drivers/gpu/drm/panel/Makefile
+++ b/drivers/gpu/drm/panel/Makefile
@@ -8,6 +8,7 @@ obj-$(CONFIG_DRM_PANEL_ELIDA_KD35T133) += panel-elida-kd35t133.o
obj-$(CONFIG_DRM_PANEL_FEIXIN_K101_IM2BA02) += panel-feixin-k101-im2ba02.o
obj-$(CONFIG_DRM_PANEL_FEIYANG_FY07024DI26A30D) += panel-feiyang-fy07024di26a30d.o
obj-$(CONFIG_DRM_PANEL_ILITEK_IL9322) += panel-ilitek-ili9322.o
+obj-$(CONFIG_DRM_PANEL_ILITEK_IL9341) += panel-ilitek-ili9341.o
obj-$(CONFIG_DRM_PANEL_ILITEK_ILI9881C) += panel-ilitek-ili9881c.o
obj-$(CONFIG_DRM_PANEL_INNOLUX_P079ZCA) += panel-innolux-p079zca.o
obj-$(CONFIG_DRM_PANEL_JDI_LT070ME05000) += panel-jdi-lt070me05000.o
diff --git a/drivers/gpu/drm/panel/panel-ilitek-ili9341.c b/drivers/gpu/drm/panel/panel-ilitek-ili9341.c
new file mode 100644
index 0000000..ec22d80
--- /dev/null
+++ b/drivers/gpu/drm/panel/panel-ilitek-ili9341.c
@@ -0,0 +1,561 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Ilitek ILI9341 TFT LCD drm_panel driver.
+ *
+ * This panel can be configured to support:
+ * - 16-bit parallel RGB interface
+ *
+ * Copyright (C) 2020 Dillon Min <dillon.minfei@gmail.com>
+ * Derived from drivers/drm/gpu/panel/panel-ilitek-ili9322.c
+ */
+
+#include <linux/bitops.h>
+#include <linux/gpio/consumer.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
+#include <linux/spi/spi.h>
+
+#include <video/mipi_display.h>
+#include <video/of_videomode.h>
+#include <video/videomode.h>
+
+#include <drm/drm_modes.h>
+#include <drm/drm_panel.h>
+#include <drm/drm_print.h>
+
+#define DEFAULT_SPI_SPEED 10000000
+
+#define ILI9341_SLEEP_OUT 0x11 /* Sleep out register */
+#define ILI9341_GAMMA 0x26 /* Gamma register */
+#define ILI9341_DISPLAY_OFF 0x28 /* Display off register */
+#define ILI9341_DISPLAY_ON 0x29 /* Display on register */
+#define ILI9341_COLUMN_ADDR 0x2A /* Colomn address register */
+#define ILI9341_PAGE_ADDR 0x2B /* Page address register */
+#define ILI9341_GRAM 0x2C /* GRAM register */
+#define ILI9341_MAC 0x36 /* Memory Access Control register*/
+#define ILI9341_PIXEL_FORMAT 0x3A /* Pixel Format register */
+#define ILI9341_WDB 0x51 /* Write Brightness Display
+ * register
+ */
+#define ILI9341_WCD 0x53 /* Write Control Display
+ * register
+ */
+#define ILI9341_RGB_INTERFACE 0xB0 /* RGB Interface Signal Control */
+#define ILI9341_FRC 0xB1 /* Frame Rate Control register */
+#define ILI9341_BPC 0xB5 /* Blanking Porch Control
+ * register
+ */
+#define ILI9341_DFC 0xB6 /* Display Function Control
+ * register
+ */
+#define ILI9341_POWER1 0xC0 /* Power Control 1 register */
+#define ILI9341_POWER2 0xC1 /* Power Control 2 register */
+#define ILI9341_VCOM1 0xC5 /* VCOM Control 1 register */
+#define ILI9341_VCOM2 0xC7 /* VCOM Control 2 register */
+#define ILI9341_POWERA 0xCB /* Power control A register */
+#define ILI9341_POWERB 0xCF /* Power control B register */
+#define ILI9341_PGAMMA 0xE0 /* Positive Gamma Correction
+ * register
+ */
+#define ILI9341_NGAMMA 0xE1 /* Negative Gamma Correction
+ * register
+ */
+#define ILI9341_DTCA 0xE8 /* Driver timing control A */
+#define ILI9341_DTCB 0xEA /* Driver timing control B */
+#define ILI9341_POWER_SEQ 0xED /* Power on sequence register */
+#define ILI9341_3GAMMA_EN 0xF2 /* 3 Gamma enable register */
+#define ILI9341_INTERFACE 0xF6 /* Interface control register */
+#define ILI9341_PRC 0xF7 /* Pump ratio control register */
+
+static u8 ili9341_cmd0[] = {0xc3, 0x08, 0x50};
+static u8 ili9341_powerb[] = {0x00, 0xc1, 0x30};
+static u8 ili9341_power_seq[] = {0x64, 0x03, 0x12, 0x81};
+static u8 ili9341_dtca[] = {0x85, 0x00, 0x78};
+static u8 ili9341_powera[] = {0x39, 0x2c, 0x00, 0x34, 0x02};
+static u8 ili9341_prc[] = {0x20};
+static u8 ili9341_dtcb[] = {0x00, 0x00};
+static u8 ili9341_frc[] = {0x00, 0x1b};
+static u8 ili9341_dfc1[] = {0x0a, 0xa2};
+static u8 ili9341_power1[] = {0x10};
+static u8 ili9341_power2[] = {0x10};
+static u8 ili9341_vcom1[] = {0x45, 0x15};
+static u8 ili9341_vcom2[] = {0x90};
+static u8 ili9341_mac[] = {0xc8};
+static u8 ili9341_gamma_en[] = {0x00};
+static u8 ili9341_rgb_intr[] = {0xc2};
+static u8 ili9341_dfc2[] = {0x0a, 0xa7, 0x27, 0x04};
+static u8 ili9341_column_addr[] = {0x00, 0x00, 0x00, 0xef};
+static u8 ili9341_page_addr[] = {0x00, 0x00, 0x01, 0x3f};
+static u8 ili9341_intr[] = {0x01, 0x00, 0x06};
+static u8 ili9341_gamma[] = {0x01};
+static u8 ili9341_pgamma[] = {0x0f, 0x29, 0x24, 0x0c, 0x0e, 0x09, 0x4e, 0x78,
+ 0x3c, 0x09, 0x13, 0x05, 0x17, 0x11, 0x00};
+static u8 ili9341_ngamma[] = {0x00, 0x16, 0x1b, 0x04, 0x11, 0x07, 0x31, 0x33,
+ 0x42, 0x05, 0x0c, 0x0a, 0x28, 0x2f, 0x0f};
+
+/**
+ * enum ili9341_input - the format of the incoming signal to the panel
+ *
+ * The panel can be connected to various input streams and four of them can
+ * be selected by electronic straps on the display. However it is possible
+ * to select another mode or override the electronic default with this
+ * setting.
+ */
+enum ili9341_input {
+ ILI9341_INPUT_PRGB_THROUGH = 0x0,
+ ILI9341_INPUT_PRGB_ALIGNED = 0x1,
+ ILI9341_INPUT_UNKNOWN = 0xf,
+};
+
+/**
+ * struct ili9341_config - the system specific ILI9341 configuration
+ * @width_mm: physical panel width [mm]
+ * @height_mm: physical panel height [mm]
+ * @input: the input/entry type used in this system, if this is set to
+ * ILI9341_INPUT_UNKNOWN the driver will try to figure it out by probing
+ * the hardware
+ * @dclk_active_high: data/pixel clock active high, data will be clocked
+ * in on the rising edge of the DCLK (this is usually the case).
+ * @de_active_high: DE (data entry) is active high
+ * @hsync_active_high: HSYNC is active high
+ * @vsync_active_high: VSYNC is active high
+ */
+struct ili9341_config {
+ u32 width_mm;
+ u32 height_mm;
+ enum ili9341_input input;
+ bool dclk_active_high;
+ bool de_active_high;
+ bool hsync_active_high;
+ bool vsync_active_high;
+};
+
+struct ili9341 {
+ struct device *dev;
+ const struct ili9341_config *conf;
+ struct drm_panel panel;
+ struct regmap *regmap;
+ struct gpio_desc *reset_gpio;
+ struct gpio_desc *dc_gpio;
+ enum ili9341_input input;
+ struct videomode vm;
+};
+
+static inline struct ili9341 *panel_to_ili9341(struct drm_panel *panel)
+{
+ return container_of(panel, struct ili9341, panel);
+}
+
+int ili9341_spi_transfer(struct spi_device *spi, u32 speed_hz,
+ u8 bpw, const void *buf, size_t len)
+{
+ size_t max_chunk = spi_max_transfer_size(spi);
+ struct spi_transfer tr = {
+ .bits_per_word = bpw,
+ .speed_hz = speed_hz,
+ .len = len,
+ };
+ struct spi_message m;
+ size_t chunk;
+ int ret;
+
+ spi_message_init_with_transfers(&m, &tr, 1);
+
+ while (len) {
+ chunk = min(len, max_chunk);
+
+ tr.tx_buf = buf;
+ tr.len = chunk;
+ buf += chunk;
+ len -= chunk;
+
+ ret = spi_sync(spi, &m);
+ if (ret)
+ return ret;
+ }
+ return 0;
+}
+static int ili9341_regmap_spi_write(void *context, const void *data,
+ size_t count)
+{
+ struct device *dev = context;
+ struct spi_device *spi = to_spi_device(dev);
+ struct ili9341 *ili = spi_get_drvdata(spi);
+ int ret = 0;
+
+ gpiod_set_value_cansleep(ili->dc_gpio, 0);
+
+ ret = ili9341_spi_transfer(spi, DEFAULT_SPI_SPEED, 8, data+0, 1);
+ if (ret || count == 1 ||
+ ((u8 *)data)[0] == ILI9341_GRAM ||
+ ((u8 *)data)[0] == ILI9341_DISPLAY_ON ||
+ ((u8 *)data)[0] == ILI9341_SLEEP_OUT ||
+ ((u8 *)data)[0] == ILI9341_DISPLAY_OFF)
+ return ret;
+
+ gpiod_set_value_cansleep(ili->dc_gpio, 1);
+
+ return ili9341_spi_transfer(spi, DEFAULT_SPI_SPEED, 8, data+1, count-1);
+}
+
+static int ili9341_regmap_spi_read(void *context, const void *reg,
+ size_t reg_size, void *val, size_t val_size)
+{
+ return 0;
+}
+
+static struct regmap_bus ili9341_regmap_bus = {
+ .write = ili9341_regmap_spi_write,
+ .read = ili9341_regmap_spi_read,
+ .reg_format_endian_default = REGMAP_ENDIAN_BIG,
+ .val_format_endian_default = REGMAP_ENDIAN_BIG,
+};
+
+static bool ili9341_volatile_reg(struct device *dev, unsigned int reg)
+{
+ return false;
+}
+
+static bool ili9341_writeable_reg(struct device *dev, unsigned int reg)
+{
+ /* Just register 0 is read-only */
+ if (reg == 0x00)
+ return false;
+ return true;
+}
+
+static const struct regmap_config ili9341_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .max_register = 0xff,
+ .cache_type = REGCACHE_RBTREE,
+ .volatile_reg = ili9341_volatile_reg,
+ .writeable_reg = ili9341_writeable_reg,
+};
+
+static int ili9341_init(struct drm_panel *panel, struct ili9341 *ili)
+{
+ regmap_bulk_write(ili->regmap, 0xca,
+ ili9341_cmd0, sizeof(ili9341_cmd0));
+ regmap_bulk_write(ili->regmap, ILI9341_POWERB,
+ ili9341_powerb, sizeof(ili9341_powerb));
+ regmap_bulk_write(ili->regmap, ILI9341_POWER_SEQ,
+ ili9341_power_seq, sizeof(ili9341_power_seq));
+ regmap_bulk_write(ili->regmap, ILI9341_DTCA,
+ ili9341_dtca, sizeof(ili9341_dtca));
+ regmap_bulk_write(ili->regmap, ILI9341_POWERA,
+ ili9341_powera, sizeof(ili9341_powera));
+ regmap_write(ili->regmap, ILI9341_PRC, ili9341_prc[0]);
+ regmap_bulk_write(ili->regmap, ILI9341_DTCB,
+ ili9341_dtcb, sizeof(ili9341_dtcb));
+ regmap_bulk_write(ili->regmap, ILI9341_FRC,
+ ili9341_frc, sizeof(ili9341_frc));
+ regmap_bulk_write(ili->regmap, ILI9341_DFC,
+ ili9341_dfc1, sizeof(ili9341_dfc1));
+ regmap_write(ili->regmap, ILI9341_POWER1, ili9341_power1[0]);
+ regmap_write(ili->regmap, ILI9341_POWER2, ili9341_power2[0]);
+ regmap_bulk_write(ili->regmap, ILI9341_VCOM1,
+ ili9341_vcom1, sizeof(ili9341_vcom1));
+ regmap_write(ili->regmap, ILI9341_VCOM2, ili9341_vcom2[0]);
+ regmap_write(ili->regmap, ILI9341_MAC, ili9341_mac[0]);
+ regmap_write(ili->regmap, ILI9341_3GAMMA_EN, ili9341_gamma_en[0]);
+ regmap_write(ili->regmap, ILI9341_RGB_INTERFACE, ili9341_rgb_intr[0]);
+ regmap_bulk_write(ili->regmap, ILI9341_DFC,
+ ili9341_dfc2, sizeof(ili9341_dfc2));
+
+ /* colomn address set */
+ regmap_bulk_write(ili->regmap, ILI9341_COLUMN_ADDR,
+ ili9341_column_addr, sizeof(ili9341_column_addr));
+
+ /* Page Address Set */
+ regmap_bulk_write(ili->regmap, ILI9341_PAGE_ADDR,
+ ili9341_page_addr, sizeof(ili9341_page_addr));
+ regmap_bulk_write(ili->regmap, ILI9341_INTERFACE,
+ ili9341_intr, sizeof(ili9341_intr));
+ regmap_write(ili->regmap, ILI9341_GRAM, 0);
+ msleep(200);
+
+ regmap_write(ili->regmap, ILI9341_GAMMA, ili9341_gamma[0]);
+ regmap_bulk_write(ili->regmap, ILI9341_PGAMMA,
+ ili9341_pgamma, sizeof(ili9341_pgamma));
+ regmap_bulk_write(ili->regmap, ILI9341_NGAMMA,
+ ili9341_ngamma, sizeof(ili9341_ngamma));
+ regmap_write(ili->regmap, ILI9341_SLEEP_OUT, 0);
+ msleep(200);
+
+ regmap_write(ili->regmap, ILI9341_DISPLAY_ON, 0);
+
+ /* GRAM start writing */
+ regmap_write(ili->regmap, ILI9341_GRAM, 0);
+
+ dev_info(ili->dev, "initialized display\n");
+
+ return 0;
+}
+
+/*
+ * This power-on sequence if from the datasheet, page 57.
+ */
+static int ili9341_power_on(struct ili9341 *ili)
+{
+ /* Assert RESET */
+ gpiod_set_value(ili->reset_gpio, 1);
+
+ msleep(20);
+
+ /* De-assert RESET */
+ gpiod_set_value(ili->reset_gpio, 0);
+
+ msleep(10);
+
+ return 0;
+}
+
+static int ili9341_power_off(struct ili9341 *ili)
+{
+ return 0;
+}
+
+static int ili9341_disable(struct drm_panel *panel)
+{
+ struct ili9341 *ili = panel_to_ili9341(panel);
+ int ret;
+
+ ret = regmap_write(ili->regmap, ILI9341_DISPLAY_OFF, 0);
+ if (ret) {
+ dev_err(ili->dev, "unable to go to standby mode\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+static int ili9341_unprepare(struct drm_panel *panel)
+{
+ struct ili9341 *ili = panel_to_ili9341(panel);
+
+ return ili9341_power_off(ili);
+}
+
+static int ili9341_prepare(struct drm_panel *panel)
+{
+ struct ili9341 *ili = panel_to_ili9341(panel);
+ int ret;
+
+ ret = ili9341_power_on(ili);
+ if (ret < 0)
+ return ret;
+
+ ret = ili9341_init(panel, ili);
+ if (ret < 0)
+ ili9341_unprepare(panel);
+
+ return ret;
+}
+
+static int ili9341_enable(struct drm_panel *panel)
+{
+ struct ili9341 *ili = panel_to_ili9341(panel);
+ int ret;
+
+ ret = regmap_write(ili->regmap, ILI9341_DISPLAY_ON, 0);
+ if (ret) {
+ dev_err(ili->dev, "unable to enable panel\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+/* This is the only mode listed for parallel RGB in the datasheet */
+static const struct drm_display_mode prgb_320x240_mode = {
+ .clock = 6100,
+ .hdisplay = 240,
+ .hsync_start = 240 + 10,
+ .hsync_end = 240 + 10 + 10,
+ .htotal = 280,
+ .vdisplay = 320,
+ .vsync_start = 320 + 4,
+ .vsync_end = 320 + 4 + 2,
+ .vtotal = 328,
+ .vrefresh = 60,
+ .flags = 0,
+};
+
+static int ili9341_get_modes(struct drm_panel *panel,
+ struct drm_connector *connector)
+{
+ struct ili9341 *ili = panel_to_ili9341(panel);
+ struct drm_device *drm = connector->dev;
+ struct drm_display_mode *mode;
+ struct drm_display_info *info;
+
+ info = &connector->display_info;
+ info->width_mm = ili->conf->width_mm;
+ info->height_mm = ili->conf->height_mm;
+ if (ili->conf->dclk_active_high)
+ info->bus_flags |= DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE;
+ else
+ info->bus_flags |= DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE;
+
+ if (ili->conf->de_active_high)
+ info->bus_flags |= DRM_BUS_FLAG_DE_HIGH;
+ else
+ info->bus_flags |= DRM_BUS_FLAG_DE_LOW;
+
+ switch (ili->input) {
+ case ILI9341_INPUT_PRGB_THROUGH:
+ case ILI9341_INPUT_PRGB_ALIGNED:
+ mode = drm_mode_duplicate(drm, &prgb_320x240_mode);
+ break;
+ default:
+ mode = NULL;
+ break;
+ }
+ if (!mode) {
+ DRM_ERROR("bad mode or failed to add mode\n");
+ return -EINVAL;
+ }
+ drm_mode_set_name(mode);
+ /*
+ * This is the preferred mode because most people are going
+ * to want to use the display with VGA type graphics.
+ */
+ mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
+
+ /* Set up the polarity */
+ if (ili->conf->hsync_active_high)
+ mode->flags |= DRM_MODE_FLAG_PHSYNC;
+ else
+ mode->flags |= DRM_MODE_FLAG_NHSYNC;
+ if (ili->conf->vsync_active_high)
+ mode->flags |= DRM_MODE_FLAG_PVSYNC;
+ else
+ mode->flags |= DRM_MODE_FLAG_NVSYNC;
+
+ mode->width_mm = ili->conf->width_mm;
+ mode->height_mm = ili->conf->height_mm;
+ drm_mode_probed_add(connector, mode);
+
+ return 1; /* Number of modes */
+}
+
+static const struct drm_panel_funcs ili9341_drm_funcs = {
+ .disable = ili9341_disable,
+ .unprepare = ili9341_unprepare,
+ .prepare = ili9341_prepare,
+ .enable = ili9341_enable,
+ .get_modes = ili9341_get_modes,
+};
+
+static int ili9341_probe(struct spi_device *spi)
+{
+ struct device *dev = &spi->dev;
+ struct ili9341 *ili;
+ const struct regmap_config *regmap_config;
+ int ret;
+
+ ili = devm_kzalloc(dev, sizeof(struct ili9341), GFP_KERNEL);
+ if (!ili)
+ return -ENOMEM;
+
+ spi_set_drvdata(spi, ili);
+
+ ili->dev = dev;
+ /*
+ * Every new incarnation of this display must have a unique
+ * data entry for the system in this driver.
+ */
+ ili->conf = of_device_get_match_data(dev);
+ if (!ili->conf) {
+ dev_err(dev, "missing device configuration\n");
+ return -ENODEV;
+ }
+
+ ili->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH);
+ if (IS_ERR(ili->reset_gpio)) {
+ dev_err(dev, "failed to get RESET GPIO\n");
+ return PTR_ERR(ili->reset_gpio);
+ }
+
+ ili->dc_gpio = devm_gpiod_get_optional(dev, "dc", GPIOD_OUT_LOW);
+ if (IS_ERR(ili->dc_gpio)) {
+ dev_err(dev, "failed to get DC GPIO\n");
+ return PTR_ERR(ili->dc_gpio);
+ }
+
+ spi->bits_per_word = 8;
+ ret = spi_setup(spi);
+ if (ret < 0) {
+ dev_err(dev, "spi setup failed.\n");
+ return ret;
+ }
+
+ regmap_config = &ili9341_regmap_config;
+
+ ili->regmap = devm_regmap_init(dev, &ili9341_regmap_bus, dev,
+ regmap_config);
+ if (IS_ERR(ili->regmap)) {
+ dev_err(dev, "failed to allocate register map\n");
+ return PTR_ERR(ili->regmap);
+ }
+
+ ili->input = ili->conf->input;
+
+ drm_panel_init(&ili->panel, dev, &ili9341_drm_funcs,
+ DRM_MODE_CONNECTOR_DPI);
+
+ return drm_panel_add(&ili->panel);
+}
+
+static int ili9341_remove(struct spi_device *spi)
+{
+ struct ili9341 *ili = spi_get_drvdata(spi);
+
+ ili9341_power_off(ili);
+ drm_panel_remove(&ili->panel);
+
+ return 0;
+}
+
+/*
+ * The Stm32f429-disco board has a panel ili9341 connected to ltdc controller
+ */
+static const struct ili9341_config ili9341_data = {
+ .width_mm = 65,
+ .height_mm = 50,
+ .input = ILI9341_INPUT_PRGB_THROUGH,
+ .dclk_active_high = true,
+ .de_active_high = false,
+ .hsync_active_high = false,
+ .vsync_active_high = false,
+};
+
+static const struct of_device_id ili9341_of_match[] = {
+ {
+ .compatible = "stm32f429,ltdc-panel",
+ .data = &ili9341_data,
+ },
+ {
+ .compatible = "ilitek,ili9341",
+ .data = NULL,
+ },
+ { }
+};
+MODULE_DEVICE_TABLE(of, ili9341_of_match);
+
+static struct spi_driver ili9341_driver = {
+ .probe = ili9341_probe,
+ .remove = ili9341_remove,
+ .driver = {
+ .name = "panel-ilitek-ili9341",
+ .of_match_table = ili9341_of_match,
+ },
+};
+module_spi_driver(ili9341_driver);
+
+MODULE_AUTHOR("Dillon Min <dillon.minfei@gmail.com>");
+MODULE_DESCRIPTION("ILI9341 LCD panel driver");
+MODULE_LICENSE("GPL v2");
--
2.7.4
\
 
 \ /
  Last update: 2020-05-08 06:14    [W:0.087 / U:0.252 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site