Messages in this thread | | | From | Roger Quadros <> | Subject | [PATCH v3 0/7] arm64: ti: k3-j721e: Add SERDES PHY and USB3.0 support | Date | Fri, 8 May 2020 11:29:30 +0300 |
| |
Hi Tero,
This series adds SERDES PHY support and Type-C USB Super-Speed support to the J721E EVM.
Please queue this for v5.8. Thanks.
cheers, -roger
Changelog: v3: - Add new DT schema for J721E System controller. - Re-order system controller's compatible string i.e. most compatible to least.
v2: - Addressed Rob's comments. - Changed type-C debounce delay from 300ms to 700ms as 300ms is not sufficient on EVM.
Kishon Vijay Abraham I (3): dt-bindings: syscon: Add TI's J721E specific compatible string arm64: dts: ti: k3-j721e-main: Add WIZ and SERDES PHY nodes arm64: dts: ti: k3-j721e-main: Add system controller node and SERDES lane mux
Roger Quadros (4): dt-bindings: mdf: ti,j721e-syscon.yaml: Add J721e system controller arm64: dts: ti: k3-j721e-main.dtsi: Add USB to SERDES MUX arm64: dts: ti: k3-j721e: Enable Super-Speed support for USB0 arm64: dts: k3-j721e-proc-board: Add wait time for sampling Type-C DIR line
.../devicetree/bindings/mfd/syscon.yaml | 1 + .../bindings/mfd/ti,j721e-syscon.yaml | 69 +++++ .../dts/ti/k3-j721e-common-proc-board.dts | 33 ++- arch/arm64/boot/dts/ti/k3-j721e-main.dtsi | 275 ++++++++++++++++++ include/dt-bindings/mux/mux-j721e-wiz.h | 53 ++++ 5 files changed, 429 insertions(+), 2 deletions(-) create mode 100644 Documentation/devicetree/bindings/mfd/ti,j721e-syscon.yaml create mode 100644 include/dt-bindings/mux/mux-j721e-wiz.h
-- Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
| |