lkml.org 
[lkml]   [2020]   [May]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH v2] thermal: qoriq: Update the settings for TMUv2
Date
PING.

BR,
Andy

> -----Original Message-----
> From: Yuantian Tang <andy.tang@nxp.com>
> Sent: 2020年4月16日 17:40
> To: rui.zhang@intel.com; edubezval@gmail.com; daniel.lezcano@linaro.org
> Cc: linux-pm@vger.kernel.org; linux-kernel@vger.kernel.org; Andy Tang
> <andy.tang@nxp.com>
> Subject: [PATCH v2] thermal: qoriq: Update the settings for TMUv2
>
> For TMU v2, TMSAR registers need to be set properly to get the accurate
> temperature values.
> Also temperature reading needs to convert to degree Celsius since it is in
> degrees Kelvin.
>
> Signed-off-by: Yuantian Tang <andy.tang@nxp.com>
> ---
> v2:
> - change the temp in millicelsius
>
> drivers/thermal/qoriq_thermal.c | 15 ++++++++++++++-
> 1 file changed, 14 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/thermal/qoriq_thermal.c
> b/drivers/thermal/qoriq_thermal.c index 028a6bbf75dc..f6371127f707
> 100644
> --- a/drivers/thermal/qoriq_thermal.c
> +++ b/drivers/thermal/qoriq_thermal.c
> @@ -23,6 +23,7 @@
> #define TMTMIR_DEFAULT 0x0000000f
> #define TIER_DISABLE 0x0
> #define TEUMR0_V2 0x51009c00
> +#define TMSARA_V2 0xe
> #define TMU_VER1 0x1
> #define TMU_VER2 0x2
>
> @@ -50,6 +51,9 @@
> * Site Register
> */
> #define TRITSR_V BIT(31)
> +#define REGS_V2_TMSAR(n) (0x304 + 16 * (n)) /* TMU monitoring
> + * site adjustment register
> + */
> #define REGS_TTRnCR(n) (0xf10 + 4 * (n)) /* Temperature Range n
> * Control Register
> */
> @@ -100,7 +104,11 @@ static int tmu_get_temp(void *p, int *temp)
> 10 * USEC_PER_MSEC))
> return -ENODATA;
>
> - *temp = (val & 0xff) * 1000;
> + /* For TMUv2, temperature reading in degrees Kelvin */
> + if (qdata->ver == TMU_VER1)
> + *temp = (val & 0xff) * 1000;
> + else
> + *temp = ((val & 0x1ff) - 273) * 1000;
>
> return 0;
> }
> @@ -192,6 +200,8 @@ static int qoriq_tmu_calibration(struct device *dev,
>
> static void qoriq_tmu_init_device(struct qoriq_tmu_data *data) {
> + int i;
> +
> /* Disable interrupt, using polling instead */
> regmap_write(data->regmap, REGS_TIER, TIER_DISABLE);
>
> @@ -202,6 +212,8 @@ static void qoriq_tmu_init_device(struct
> qoriq_tmu_data *data)
> } else {
> regmap_write(data->regmap, REGS_V2_TMTMIR,
> TMTMIR_DEFAULT);
> regmap_write(data->regmap, REGS_V2_TEUMR(0), TEUMR0_V2);
> + for (i = 0; i < 7; i++)
> + regmap_write(data->regmap, REGS_V2_TMSAR(i),
> TMSARA_V2);
> }
>
> /* Disable monitoring */
> @@ -212,6 +224,7 @@ static const struct regmap_range qoriq_yes_ranges[]
> = {
> regmap_reg_range(REGS_TMR, REGS_TSCFGR),
> regmap_reg_range(REGS_TTRnCR(0), REGS_TTRnCR(3)),
> regmap_reg_range(REGS_V2_TEUMR(0), REGS_V2_TEUMR(2)),
> + regmap_reg_range(REGS_V2_TMSAR(0), REGS_V2_TMSAR(15)),
> regmap_reg_range(REGS_IPBRR(0), REGS_IPBRR(1)),
> /* Read only registers below */
> regmap_reg_range(REGS_TRITSR(0), REGS_TRITSR(15)),
> --
> 2.17.1

\
 
 \ /
  Last update: 2020-05-07 08:21    [W:0.269 / U:0.284 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site