lkml.org 
[lkml]   [2020]   [May]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 3/7] rtc: ingenic: Enable clock in probe
Date
It makes no sense to request a clock and not enable it even though the
hardware is being used. So the driver now enables the clock in the
probe. Besides, now we can properly handle errors.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
---
drivers/rtc/rtc-jz4740.c | 19 +++++++++++++++++--
1 file changed, 17 insertions(+), 2 deletions(-)

diff --git a/drivers/rtc/rtc-jz4740.c b/drivers/rtc/rtc-jz4740.c
index 06ee08089815..129c68cebb92 100644
--- a/drivers/rtc/rtc-jz4740.c
+++ b/drivers/rtc/rtc-jz4740.c
@@ -264,8 +264,6 @@ static void jz4740_rtc_power_off(void)
unsigned long wakeup_filter_ticks;
unsigned long reset_counter_ticks;

- clk_prepare_enable(rtc->clk);
-
rtc_rate = clk_get_rate(rtc->clk);

/*
@@ -297,6 +295,11 @@ static void jz4740_rtc_power_off(void)
kernel_halt();
}

+static void jz4740_rtc_clk_disable(void *data)
+{
+ clk_disable_unprepare(data);
+}
+
static const struct of_device_id jz4740_rtc_of_match[] = {
{ .compatible = "ingenic,jz4740-rtc", .data = (void *)ID_JZ4740 },
{ .compatible = "ingenic,jz4760-rtc", .data = (void *)ID_JZ4760 },
@@ -332,6 +335,18 @@ static int jz4740_rtc_probe(struct platform_device *pdev)
return PTR_ERR(rtc->clk);
}

+ ret = clk_prepare_enable(rtc->clk);
+ if (ret) {
+ dev_err(dev, "Failed to enable clock\n");
+ return ret;
+ }
+
+ ret = devm_add_action_or_reset(dev, jz4740_rtc_clk_disable, rtc->clk);
+ if (ret) {
+ dev_err(dev, "Failed to register devm action\n");
+ return ret;
+ }
+
spin_lock_init(&rtc->lock);

platform_set_drvdata(pdev, rtc);
--
2.26.2
\
 
 \ /
  Last update: 2020-05-06 00:14    [W:0.048 / U:0.028 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site