lkml.org 
[lkml]   [2020]   [May]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/2] dt-bindings: soc: qcom: Add devicetree binding for Qcom IPCC
On Thu, Apr 30, 2020 at 12:36:09PM -0700, Bjorn Andersson wrote:
> On Wed 29 Apr 23:30 PDT 2020, Manivannan Sadhasivam wrote:
>
> > Add devicetree YAML binding for Qualcomm Inter-Processor Communication
> > Controller (IPCC) block.
> >
> > Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> > ---
> > .../bindings/soc/qcom/qcom,ipcc.yaml | 85 +++++++++++++++++++
>
> How about putting this in either interrupt-controller/ or mailbox/ instead?
>

I thought about it but was not sure. But if we want to move it to other
relevant location I think mailbox is a better one. Because, there are other
places where subsystem drivers expose irqchip functionality. So I think a
mailbox driver exposing irqchip is a relevant one for this.

> > include/dt-bindings/soc/qcom,ipcc.h | 38 +++++++++
> > 2 files changed, 123 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,ipcc.yaml
> > create mode 100644 include/dt-bindings/soc/qcom,ipcc.h
> >
> > diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,ipcc.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,ipcc.yaml
> > new file mode 100644
> > index 000000000000..48b281181401
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,ipcc.yaml
> > @@ -0,0 +1,85 @@
> > +# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/soc/qcom/qcom,ipcc.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Qualcomm Technologies, Inc. Inter-Processor Communication Controller
> > +
> > +maintainers:
> > + - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> > +
> > +description:
> > + The Inter-Processor Communication Controller (IPCC) is a centralized hardware
> > + to route the interrupts across various subsystems. It involves a three-level
>
> s/the//
>
> > + addressing scheme called protocol, client and signal. For example, consider an
> > + entity on the Application Processor Subsystem (APSS) that wants to listen to
> > + Modem's interrupts via Shared Memory Point to Point (SMP2P) interface. In such
> > + a case, the client would be Modem (client-id is 2) and the signal would be
> > + SMP2P (signal-id is 2). The SMP2P itself falls under the Multiprocessor (MPROC)
> > + protocol (protocol-id is 0). Refer include/dt-bindings/soc/qcom/qcom,ipcc.h
> > + for the list of such IDs.
> > +
> > + One of the duties of this interrupt controller driver is to forward the
> > + interrupts to the correct entities on the APSS. The children inheriting the
>
> Clients using the...
>
> > + interrupt-controller would be mentioning the client-id and signal-id it's
>
> s/would be mentioning/should specify/
>
> > + interested in.
> > +
> > + On the other hand, sending an interrupt to a subsystem is done through the
>
> "In the other direction," and add clarify subsystem by making it "remote
> subsystem".
>
> > + mailbox interface, which again requires client-id and signal-id.
> > +
> > +properties:
> > + compatible:
>
> It's uncertain how new vers
>

lost?

> > + const: "qcom,ipcc"
> > +
> > + reg:
> > + maxItems: 1
> > +
> > + interrupts:
> > + maxItems: 1
> > +
> > + interrupt-controller: true
> > +
> > + "#interrupt-cells":
> > + const: 3
> > + description:
> > + The first cell is the client-id, the second cell is the signal-id and the
> > + third cell is the interrupt type.
> > +
> > + "#mbox-cells":
> > + const: 2
> > + description:
> > + The first cell is the client-id, and the second cell is the signal-id.
> > +
> > +required:
> > + - compatible
> > + - reg
> > + - interrupts
> > + - interrupt-controller
> > + - "#interrupt-cells"
> > + - "#mbox-cells"
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > + - |
> > + #include <dt-bindings/interrupt-controller/arm-gic.h>
> > + #include <dt-bindings/soc/qcom,ipcc.h>
> > +
> > + ipcc_mproc: qcom,ipcc@408000 {
>
> interrupt-controller@
>

mailbox?

Thanks,
Mani

> Regards,
> Bjorn
>
> > + compatible = "qcom,ipcc";
> > + reg = <0x408000 0x1000>;
> > + interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
> > + interrupt-controller;
> > + #interrupt-cells = <3>;
> > + #mbox-cells = <2>;
> > + };
> > +
> > + smp2p-modem {
> > + compatible = "qcom,smp2p";
> > + interrupts-extended = <&ipcc_mproc IPCC_CLIENT_MPSS
> > + IPCC_MPROC_SIGNAL_SMP2P IRQ_TYPE_EDGE_RISING>;
> > + mboxes = <&ipcc_mproc IPCC_CLIENT_MPSS IPCC_MPROC_SIGNAL_SMP2P>;
> > +
> > + /* Other SMP2P fields */
> > + };
> > diff --git a/include/dt-bindings/soc/qcom,ipcc.h b/include/dt-bindings/soc/qcom,ipcc.h
> > new file mode 100644
> > index 000000000000..2926cdb4cb48
> > --- /dev/null
> > +++ b/include/dt-bindings/soc/qcom,ipcc.h
> > @@ -0,0 +1,38 @@
> > +/* SPDX-License-Identifier: GPL-2.0-only */
> > +/*
> > + * Copyright (c) 2018-2019, The Linux Foundation. All rights reserved.
> > + */
> > +
> > +#ifndef __DT_BINDINGS_QCOM_IPCC_H
> > +#define __DT_BINDINGS_QCOM_IPCC_H
> > +
> > +/* Signal IDs for MPROC protocol */
> > +#define IPCC_MPROC_SIGNAL_GLINK_QMP 0
> > +#define IPCC_MPROC_SIGNAL_SMP2P 2
> > +#define IPCC_MPROC_SIGNAL_PING 3
> > +#define IPCC_MPROC_SIGNAL_MAX 4 /* Used by driver only */
> > +
> > +#define IPCC_COMPUTE_L0_SIGNAL_MAX 32 /* Used by driver only */
> > +#define IPCC_COMPUTE_L1_SIGNAL_MAX 32 /* Used by driver only */
> > +
> > +/* Client IDs */
> > +#define IPCC_CLIENT_AOP 0
> > +#define IPCC_CLIENT_TZ 1
> > +#define IPCC_CLIENT_MPSS 2
> > +#define IPCC_CLIENT_LPASS 3
> > +#define IPCC_CLIENT_SLPI 4
> > +#define IPCC_CLIENT_SDC 5
> > +#define IPCC_CLIENT_CDSP 6
> > +#define IPCC_CLIENT_NPU 7
> > +#define IPCC_CLIENT_APSS 8
> > +#define IPCC_CLIENT_GPU 9
> > +#define IPCC_CLIENT_CVP 10
> > +#define IPCC_CLIENT_CAM 11
> > +#define IPCC_CLIENT_VPU 12
> > +#define IPCC_CLIENT_PCIE0 13
> > +#define IPCC_CLIENT_PCIE1 14
> > +#define IPCC_CLIENT_PCIE2 15
> > +#define IPCC_CLIENT_SPSS 16
> > +#define IPCC_CLIENT_MAX 17 /* Used by driver only */
> > +
> > +#endif
> > --
> > 2.17.1
> >

\
 
 \ /
  Last update: 2020-05-04 08:17    [W:2.103 / U:0.008 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site