lkml.org 
[lkml]   [2020]   [May]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH V6 3/7] iio: adc: Add info property under adc_data
On Thu, 28 May 2020 22:24:25 +0530
Jishnu Prakash <jprakash@codeaurora.org> wrote:

> Add info property under adc_data to support adding ADC variants
> which may use different iio_info than the one defined for PMIC5.
>
> Signed-off-by: Jishnu Prakash <jprakash@codeaurora.org>

Applied.

Thanks,

Jonathan

> ---
> drivers/iio/adc/qcom-spmi-adc5.c | 4 +++-
> drivers/iio/adc/qcom-vadc-common.h | 1 +
> 2 files changed, 4 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/iio/adc/qcom-spmi-adc5.c b/drivers/iio/adc/qcom-spmi-adc5.c
> index 21fdcde..0fa1d37 100644
> --- a/drivers/iio/adc/qcom-spmi-adc5.c
> +++ b/drivers/iio/adc/qcom-spmi-adc5.c
> @@ -629,6 +629,7 @@ static const struct adc5_data adc5_data_pmic = {
> .full_scale_code_volt = 0x70e4,
> .full_scale_code_cur = 0x2710,
> .adc_chans = adc5_chans_pmic,
> + .info = &adc5_info,
> .decimation = (unsigned int [ADC5_DECIMATION_SAMPLES_MAX])
> {250, 420, 840},
> .hw_settle_1 = (unsigned int [VADC_HW_SETTLE_SAMPLES_MAX])
> @@ -643,6 +644,7 @@ static const struct adc5_data adc5_data_pmic_rev2 = {
> .full_scale_code_volt = 0x4000,
> .full_scale_code_cur = 0x1800,
> .adc_chans = adc5_chans_rev2,
> + .info = &adc5_info,
> .decimation = (unsigned int [ADC5_DECIMATION_SAMPLES_MAX])
> {256, 512, 1024},
> .hw_settle_1 = (unsigned int [VADC_HW_SETTLE_SAMPLES_MAX])
> @@ -777,7 +779,7 @@ static int adc5_probe(struct platform_device *pdev)
> indio_dev->dev.of_node = node;
> indio_dev->name = pdev->name;
> indio_dev->modes = INDIO_DIRECT_MODE;
> - indio_dev->info = &adc5_info;
> + indio_dev->info = adc->data->info;
> indio_dev->channels = adc->iio_chans;
> indio_dev->num_channels = adc->nchannels;
>
> diff --git a/drivers/iio/adc/qcom-vadc-common.h b/drivers/iio/adc/qcom-vadc-common.h
> index e074902a..6a7553f 100644
> --- a/drivers/iio/adc/qcom-vadc-common.h
> +++ b/drivers/iio/adc/qcom-vadc-common.h
> @@ -136,6 +136,7 @@ struct adc5_data {
> const u32 full_scale_code_volt;
> const u32 full_scale_code_cur;
> const struct adc5_channels *adc_chans;
> + const struct iio_info *info;
> unsigned int *decimation;
> unsigned int *hw_settle_1;
> unsigned int *hw_settle_2;

\
 
 \ /
  Last update: 2020-05-31 12:49    [W:0.074 / U:2.660 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site