lkml.org 
[lkml]   [2020]   [May]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH 00/14] msm8992 DTS updates, peripheral enablement
Date
This patch series adds support for PMU, PSCI, SPMI
and SCM, as well as all six cores on msm8992.

Please note though, that due to the lack of a core
cluster interconnect driver, it is only recommended
to use one cluster (as in set NR_CPUS to 4) for now.
The other two technically work, but in practice slow
down the platform by a LOT.

Hopefully with a proper MMCC driver this platform can be
brought up to speed with other Qualcomm SoCs.

Konrad Dybcio (14):
arm64: dts: Add a proper CPU map for MSM8992
arm64: dts: msm8992: Place clock nodes in clocks{}
arm64: dts: msm8992: Add a SCM node
firmware: qcom_scm: Add msm8992 compatible
Documentation: Document msm8992 qcom_scm compatible
arm64: dts: msm8992: Add a spmi_bus node
arm64: dts: msm8992: Add BLSP2 UART2 node
arm64: dts: msm8992: Add a BLSP I2C2 node
arm64: dts: msm8992: Add a BLSP I2C6 node
arm64: dts: msm8992: Add PMU node
arm64: dts: msm8992: Add PSCI support.
arm64: dts: qcom: Update msm8992 pin configuration
arm64: dts: qcom: Fix msm8992 SDHCI
arm64: dts: qcom: Add a label to the msm8992 rpm-requests node

.../devicetree/bindings/firmware/qcom,scm.txt | 1 +
arch/arm64/boot/dts/qcom/msm8992-pins.dtsi | 149 ++++++++++++----
arch/arm64/boot/dts/qcom/msm8992.dtsi | 167 ++++++++++++++++--
drivers/firmware/qcom_scm.c | 1 +
4 files changed, 275 insertions(+), 43 deletions(-)

--
2.26.2

\
 
 \ /
  Last update: 2020-05-31 19:29    [W:0.095 / U:5.716 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site