lkml.org 
[lkml]   [2020]   [May]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2] selftests/ftrace: Use printf instead of echo in kprobe syntax error tests
On Wed, Mar 04, 2020 at 04:20:09PM -0600, Seth Forshee wrote:
> Test cases which use echo to write strings containing backslashes
> fail with some shells, as echo's treatment of backslashes in
> strings varies between shell implementations. Use printf instead,
> as it should behave consistently across different shells. This
> requires adjustments to the strings to escape \ and % characters.
> ftrace_errlog_check() must also re-escape these characters after
> processing them to remove ^ characters.
>
> Signed-off-by: Seth Forshee <seth.forshee@canonical.com>

Ping. Someone just asked me about this patch, and I noticed that it
hasn't been applied or received any feedback.

> ---
> Changes in v2:
> - Escape backslashes for a couple of additional tests
>
> .../testing/selftests/ftrace/test.d/functions | 6 +++---
> .../test.d/kprobe/kprobe_syntax_errors.tc | 20 +++++++++----------
> 2 files changed, 13 insertions(+), 13 deletions(-)
>
> diff --git a/tools/testing/selftests/ftrace/test.d/functions b/tools/testing/selftests/ftrace/test.d/functions
> index 5d4550591ff9..b38c6eb029e8 100644
> --- a/tools/testing/selftests/ftrace/test.d/functions
> +++ b/tools/testing/selftests/ftrace/test.d/functions
> @@ -114,11 +114,11 @@ yield() {
> }
>
> ftrace_errlog_check() { # err-prefix command-with-error-pos-by-^ command-file
> - pos=$(echo -n "${2%^*}" | wc -c) # error position
> - command=$(echo "$2" | tr -d ^)
> + pos=$(printf "${2%^*}" | wc -c) # error position
> + command=$(printf "$2" | sed -e 's/\^//g' -e 's/%/%%/g' -e 's/\\/\\\\/g')
> echo "Test command: $command"
> echo > error_log
> - (! echo "$command" >> "$3" ) 2> /dev/null
> + (! printf "$command" >> "$3" ) 2> /dev/null
> grep "$1: error:" -A 3 error_log
> N=$(tail -n 1 error_log | wc -c)
> # " Command: " and "^\n" => 13
> diff --git a/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_syntax_errors.tc b/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_syntax_errors.tc
> index ef1e9bafb098..039c03d230b9 100644
> --- a/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_syntax_errors.tc
> +++ b/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_syntax_errors.tc
> @@ -37,14 +37,14 @@ fi
>
> check_error 'p vfs_read ^$none_var' # BAD_VAR
>
> -check_error 'p vfs_read ^%none_reg' # BAD_REG_NAME
> +check_error 'p vfs_read ^%%none_reg' # BAD_REG_NAME
> check_error 'p vfs_read ^@12345678abcde' # BAD_MEM_ADDR
> check_error 'p vfs_read ^@+10' # FILE_ON_KPROBE
>
> grep -q "imm-value" README && \
> -check_error 'p vfs_read arg1=\^x' # BAD_IMM
> +check_error 'p vfs_read arg1=\\^x' # BAD_IMM
> grep -q "imm-string" README && \
> -check_error 'p vfs_read arg1=\"abcd^' # IMMSTR_NO_CLOSE
> +check_error 'p vfs_read arg1=\\"abcd^' # IMMSTR_NO_CLOSE
>
> check_error 'p vfs_read ^+0@0)' # DEREF_NEED_BRACE
> check_error 'p vfs_read ^+0ab1(@0)' # BAD_DEREF_OFFS
> @@ -80,7 +80,7 @@ check_error 'p vfs_read arg1=^' # NO_ARG_BODY
> # instruction boundary check is valid on x86 (at this moment)
> case $(uname -m) in
> x86_64|i[3456]86)
> - echo 'p vfs_read' > kprobe_events
> + printf 'p vfs_read' > kprobe_events
> if grep -q FTRACE ../kprobes/list ; then
> check_error 'p ^vfs_read+3' # BAD_INSN_BNDRY (only if function-tracer is enabled)
> fi
> @@ -89,13 +89,13 @@ esac
>
> # multiprobe errors
> if grep -q "Create/append/" README && grep -q "imm-value" README; then
> -echo 'p:kprobes/testevent _do_fork' > kprobe_events
> +printf 'p:kprobes/testevent _do_fork' > kprobe_events
> check_error '^r:kprobes/testevent do_exit' # DIFF_PROBE_TYPE
> -echo 'p:kprobes/testevent _do_fork abcd=\1' > kprobe_events
> -check_error 'p:kprobes/testevent _do_fork ^bcd=\1' # DIFF_ARG_TYPE
> -check_error 'p:kprobes/testevent _do_fork ^abcd=\1:u8' # DIFF_ARG_TYPE
> -check_error 'p:kprobes/testevent _do_fork ^abcd=\"foo"' # DIFF_ARG_TYPE
> -check_error '^p:kprobes/testevent _do_fork abcd=\1' # SAME_PROBE
> +printf 'p:kprobes/testevent _do_fork abcd=\\1' > kprobe_events
> +check_error 'p:kprobes/testevent _do_fork ^bcd=\\1' # DIFF_ARG_TYPE
> +check_error 'p:kprobes/testevent _do_fork ^abcd=\\1:u8' # DIFF_ARG_TYPE
> +check_error 'p:kprobes/testevent _do_fork ^abcd=\\"foo"'# DIFF_ARG_TYPE
> +check_error '^p:kprobes/testevent _do_fork abcd=\\1' # SAME_PROBE
> fi
>
> exit 0
> --
> 2.25.0
>

\
 
 \ /
  Last update: 2020-05-29 22:37    [W:0.528 / U:0.320 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site