lkml.org 
[lkml]   [2020]   [May]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4/6] bus: bt1-apb: Use sysfs_streq instead of strncmp
Date
There is a ready-to-use method to compare a retrieved from a sysfs node
string with another string. It treats both NUL and newline-then-NUL as
equivalent string terminations. So use it instead of manually truncating
the line length in the strncmp() method.

Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Cc: Olof Johansson <olof@lixom.net>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: soc@kernel.org
---
drivers/bus/bt1-apb.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/bus/bt1-apb.c b/drivers/bus/bt1-apb.c
index 7e57fc2af745..b25ff941e7c7 100644
--- a/drivers/bus/bt1-apb.c
+++ b/drivers/bus/bt1-apb.c
@@ -325,9 +325,9 @@ static ssize_t inject_error_store(struct device *dev,
* Either dummy read from the unmapped address in the APB IO area
* or manually set the IRQ status.
*/
- if (!strncmp(data, "nodev", 5))
+ if (sysfs_streq(data, "nodev"))
readl(apb->res);
- else if (!strncmp(data, "irq", 3))
+ else if (sysfs_streq(data, "irq"))
regmap_update_bits(apb->regs, APB_EHB_ISR, APB_EHB_ISR_PENDING,
APB_EHB_ISR_PENDING);
else
--
2.26.2
\
 
 \ /
  Last update: 2020-05-28 16:52    [W:3.115 / U:0.008 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site