lkml.org 
[lkml]   [2020]   [May]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [EXTERNAL] Re: [PATCH v10 3/4] dt-bindings: power: Add the bindings for the bq2515x family of chargers.
Date


> On May 28, 2020, at 08:53, Rob Herring <robh@kernel.org> wrote:
>
> On Wed, 27 May 2020 18:17:42 -0500, Ricardo Rivera-Matos wrote:
>> The BQ2515X family of devices are highly integrated battery management
>> ICs that integrate the most common functions for wearable devices
>> namely a charger, an output voltage rail, ADC for battery and system
>> monitoring, and a push-button controller.
>>
>> Datasheets:
>> http://www.ti.com/lit/ds/symlink/bq25150.pdf
>> http://www.ti.com/lit/ds/symlink/bq25155.pdf
>>
>> Signed-off-by: Ricardo Rivera-Matos <r-rivera-matos@ti.com>
>> ---
>> .../bindings/power/supply/bq2515x.yaml | 91 +++++++++++++++++++
>> 1 file changed, 91 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/power/supply/bq2515x.yaml
>>
>
>
> My bot found errors running 'make dt_binding_check' on your patch:
>
> /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/power/supply/bq2515x.example.dt.yaml: charger@6b: 'low-power-gpios' does not match any of the regexes: 'pinctrl-[0-9]+'
>
> See https://patchwork.ozlabs.org/patch/1299261
>
> If you already ran 'make dt_binding_check' and didn't see the above
> error(s), then make sure dt-schema is up to date:
>
> pip3 install git+https://github.com/devicetree-org/dt-schema.git@master --upgrade
>
> Please check and re-submit.
ACK
>
\
 
 \ /
  Last update: 2020-05-28 16:04    [W:0.043 / U:3.684 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site