lkml.org 
[lkml]   [2020]   [May]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 4/6] bus: Add Baikal-T1 AXI-bus driver
On Thu, May 28, 2020 at 02:44:32PM +0200, Arnd Bergmann wrote:
> On Thu, May 28, 2020 at 2:27 PM Serge Semin
> <Sergey.Semin@baikalelectronics.ru> wrote:
> >
> > On Thu, May 28, 2020 at 02:14:58PM +0200, Arnd Bergmann wrote:
> > > On Thu, May 28, 2020 at 12:01 AM Andy Shevchenko
> > > <andy.shevchenko@gmail.com> wrote:
> > > > On Tuesday, May 26, 2020, Serge Semin <Sergey.Semin@baikalelectronics.ru> wrote:
> > > >>
> > > >> AXI3-bus is the main communication bus connecting all high-speed
> > > >> peripheral IP-cores with RAM controller and MIPS P5600 cores on Baikal-T1
> > > >> SoC. Bus traffic arbitration is done by means of DW AMBA 3 AXI
> > > >> Interconnect (so called AXI Main Interconnect) routing IO requests from
> > > >> one SoC block to another. This driver provides a way to detect any bus
> > > >> protocol errors and device not responding situations by means of an
> > > >> embedded on top of the interconnect errors handler block (EHB). AXI
> > > >> Interconnect QoS arbitration tuning is currently unsupported.
> > > >> The bus doesn't provide a way to detect the interconnected devices,
> > > >> so they are supposed to be statically defined like by means of the
> > > >> simple-bus sub-nodes.
> > > >
> > > >
> > > >
> > > > Few comments in case if you need a new version. Main point is about sysfs_streq().
> > >
> > > I've applied the patch now and folded in fixes for the build warnings and
> > > errors pointed out by the test robot, but I did not include the changes you
> > > suggested.
> >
> > Are you saying that the build-errors and warnings have already been fixed by
> > you, right? If so could you please give me a link to the repo with those
> > commits, so I'd work with the up-to-date code?
>

> I've pushed it to https://git.kernel.org/pub/scm/linux/kernel/git/soc/soc.git/,
>
> I made a local "baikal/drivers" branch with just your patches, updated
> to address the build reports. This is merged into the "arm/drivers"
> branch that contains all driver specific changes across all SoCs and
> this is what I'll send to Linus next week.
>
> There is also the "for-next" branch that contains all arm/* branches,
> and this is what gets pulled into linux-next, so your patches will show
> up there tomorrow as well.

I see. Thanks for explanation. I've monitored the soc/soc.git a few minutes
ago, but the gitolite web-interface showed me that the last update was made
9 hours ago. So I thought you could be using some another repo. Now I see
the fresh updates and the drivers being merges.

I'll address the Andy's comments and send a follow-up patches with fixes shortly
today.

BTW I don't see the next commit:
[PATCH v3 3/6] dt-bindings: memory: Add Baikal-T1 L2-cache Control Block binding
in the baikal/drivers, so the l2-ctl binding hasn't been merged into the
arm/drivers and for-next branches. You must have missed that patch. Could you
please make sure it's also merged in?

Thanks
-Sergey

>
> You can normally check the status of any submission to soc@kernel.org
> at https://patchwork.kernel.org/project/linux-soc/list/, but it seems that
> has not picked up the status yet, and I'll have to update it manually.
>
> Arnd

\
 
 \ /
  Last update: 2020-05-28 15:01    [W:0.073 / U:0.536 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site