lkml.org 
[lkml]   [2020]   [May]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH net-next 09/11] net: hns3: remove two duplicated register macros in hclgevf_main.h
Date
HCLGEVF_CMDQ_INTR_SRC_REG and HCLGEVF_CMDQ_INTR_STS_REG are same
as HCLGEVF_VECTOR0_CMDQ_SRC_REG and HCLGEVF_VECTOR0_CMDQ_STAT_REG,
replace the former with the latter, and rename macro
HCLGEVF_VECTOR0_CMDQ_STAT_REG since 'stat' is not abbreviation of
'state'.

Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
---
drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c | 6 +++---
drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.h | 4 +---
2 files changed, 4 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c
index be5789b..a8c0e79 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c
@@ -46,7 +46,7 @@ static const u32 cmdq_reg_addr_list[] = {HCLGEVF_CMDQ_TX_ADDR_L_REG,
HCLGEVF_CMDQ_RX_TAIL_REG,
HCLGEVF_CMDQ_RX_HEAD_REG,
HCLGEVF_VECTOR0_CMDQ_SRC_REG,
- HCLGEVF_CMDQ_INTR_STS_REG,
+ HCLGEVF_VECTOR0_CMDQ_STATE_REG,
HCLGEVF_CMDQ_INTR_EN_REG,
HCLGEVF_CMDQ_INTR_GEN_REG};

@@ -1826,7 +1826,7 @@ static void hclgevf_dump_rst_info(struct hclgevf_dev *hdev)
dev_info(&hdev->pdev->dev, "vector0 interrupt enable status: 0x%x\n",
hclgevf_read_dev(&hdev->hw, HCLGEVF_MISC_VECTOR_REG_BASE));
dev_info(&hdev->pdev->dev, "vector0 interrupt status: 0x%x\n",
- hclgevf_read_dev(&hdev->hw, HCLGEVF_VECTOR0_CMDQ_STAT_REG));
+ hclgevf_read_dev(&hdev->hw, HCLGEVF_VECTOR0_CMDQ_STATE_REG));
dev_info(&hdev->pdev->dev, "handshake status: 0x%x\n",
hclgevf_read_dev(&hdev->hw, HCLGEVF_CMDQ_TX_DEPTH_REG));
dev_info(&hdev->pdev->dev, "function reset status: 0x%x\n",
@@ -2250,7 +2250,7 @@ static enum hclgevf_evt_cause hclgevf_check_evt_cause(struct hclgevf_dev *hdev,

/* fetch the events from their corresponding regs */
cmdq_stat_reg = hclgevf_read_dev(&hdev->hw,
- HCLGEVF_VECTOR0_CMDQ_STAT_REG);
+ HCLGEVF_VECTOR0_CMDQ_STATE_REG);

if (BIT(HCLGEVF_VECTOR0_RST_INT_B) & cmdq_stat_reg) {
rst_ing_reg = hclgevf_read_dev(&hdev->hw, HCLGEVF_RST_ING);
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.h b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.h
index f19583c..738de12 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.h
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.h
@@ -42,8 +42,6 @@
#define HCLGEVF_CMDQ_RX_DEPTH_REG 0x27020
#define HCLGEVF_CMDQ_RX_TAIL_REG 0x27024
#define HCLGEVF_CMDQ_RX_HEAD_REG 0x27028
-#define HCLGEVF_CMDQ_INTR_SRC_REG 0x27100
-#define HCLGEVF_CMDQ_INTR_STS_REG 0x27104
#define HCLGEVF_CMDQ_INTR_EN_REG 0x27108
#define HCLGEVF_CMDQ_INTR_GEN_REG 0x2710C

@@ -88,7 +86,7 @@
/* Vector0 interrupt CMDQ event source register(RW) */
#define HCLGEVF_VECTOR0_CMDQ_SRC_REG 0x27100
/* Vector0 interrupt CMDQ event status register(RO) */
-#define HCLGEVF_VECTOR0_CMDQ_STAT_REG 0x27104
+#define HCLGEVF_VECTOR0_CMDQ_STATE_REG 0x27104
/* CMDQ register bits for RX event(=MBX event) */
#define HCLGEVF_VECTOR0_RX_CMDQ_INT_B 1
/* RST register bits for RESET event */
--
2.7.4
\
 
 \ /
  Last update: 2020-05-28 14:50    [W:0.088 / U:0.112 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site