lkml.org 
[lkml]   [2020]   [May]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH net] net: mvpp2: Enable autoneg bypass for 1000BaseX/2500BaseX ports
Date
Commit d14e078f23cc ("net: marvell: mvpp2: only reprogram what is necessary
on mac_config") disabled auto negotiation bypass completely, which breaks
platforms enabling bypass via firmware (not the best option, but it worked).
Since 1000BaseX/2500BaseX ports neither negotiate speed nor duplex mode
we could enable auto negotiation bypass to get back information about link
state.

Fixes: d14e078f23cc ("net: marvell: mvpp2: only reprogram what is necessary on mac_config")
Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
---
drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c | 1 +
1 file changed, 1 insertion(+)

diff --git a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
index 2b5dad2ec650..ddcd781052e1 100644
--- a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
+++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
@@ -5043,6 +5043,7 @@ static void mvpp2_gmac_config(struct mvpp2_port *port, unsigned int mode,
MVPP2_GMAC_CONFIG_GMII_SPEED |
MVPP2_GMAC_CONFIG_FULL_DUPLEX);
an |= MVPP2_GMAC_IN_BAND_AUTONEG |
+ MVPP2_GMAC_IN_BAND_AUTONEG_BYPASS |
MVPP2_GMAC_CONFIG_GMII_SPEED |
MVPP2_GMAC_CONFIG_FULL_DUPLEX;

--
2.16.4
\
 
 \ /
  Last update: 2020-05-28 14:12    [W:0.080 / U:0.376 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site