[lkml]   [2020]   [May]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Patch in this message
Subject[PATCH v6 05/11] i2c: designware: slave: Set DW I2C core module dependency
DW APB I2C slave code in fact depends on the DW I2C driver core, but not
on the platform code as it used to be before commit 90bc1ee6de9f ("i2c:
designware: Allow slave mode for PCI enumerated devices"). Yes, the I2C
slave interface is currently supported by both the platform and PCI
versions of the IP core, but it still depends on the DW I2C core
functionality and must be available only if the last one is enabled.
So make sure the DW APB I2C slave config is only available if the
I2C_DESIGNWARE_CORE config is enabled.

Signed-off-by: Serge Semin <>
Acked-by: Jarkko Nikula <>
Cc: Alexey Malahov <>
Cc: Thomas Bogendoerfer <>
Cc: Andy Shevchenko <>
Cc: Mika Westerberg <>
Cc: Rob Herring <>
drivers/i2c/busses/Kconfig | 1 +
1 file changed, 1 insertion(+)

diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 1d940810e47e..7f92f6a96042 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -529,6 +529,7 @@ config I2C_DESIGNWARE_CORE

bool "Synopsys DesignWare Slave"
+ depends on I2C_DESIGNWARE_CORE
select I2C_SLAVE
If you say yes to this option, support will be included for the
 \ /
  Last update: 2020-05-28 11:34    [W:0.152 / U:5.468 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site