lkml.org 
[lkml]   [2020]   [May]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH net-next v3 0/3] net: enetc: remove bootloader dependency
On Thu, 28 May 2020 at 11:18, Michael Walle <michael@walle.cc> wrote:
>
> Am 2020-05-28 08:38, schrieb Michael Walle:
> > These patches were picked from the following series:
> > https://lore.kernel.org/netdev/1567779344-30965-1-git-send-email-claudiu.manoil@nxp.com/
> > They have never been resent. I've picked them up, addressed Andrews
> > comments, fixed some more bugs and asked Claudiu if I can keep their
> > SOB
> > tags; he agreed. I've tested this on our board which happens to have a
> > bootloader which doesn't do the enetc setup in all cases. Though, only
> > SGMII mode was tested.
> >
> > changes since v2:
> > - removed SOBs from "net: enetc: Initialize SerDes for SGMII and
> > USXGMII
> > protocols" because almost everything has changed.
> > - get a phy_device for the internal PCS PHY so we can use the phy_
> > functions instead of raw mdiobus writes
>
> mhh after reading,
> https://lore.kernel.org/netdev/CA+h21hoq2qkmxDFEb2QgLfrbC0PYRBHsca=0cDcGOr3txy9hsg@mail.gmail.com/
> this seems to be the wrong way of doing it.
>
> -michael

FWIW, some time after the merge window closes, I plan to convert the
felix and seville drivers to mdio_device. It wouldn't be such a big
deal to also convert enetc to phylink then, and also do this
phy_device -> mdio_device for it too.

Thanks,
-Vladimir

\
 
 \ /
  Last update: 2020-05-28 10:44    [W:0.077 / U:1.092 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site