lkml.org 
[lkml]   [2020]   [May]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 04/14] mtd: spi-nor: sfdp: prepare BFPT parsing for JESD216 rev D
Date
From: Pratyush Yadav <p.yadav@ti.com>

JESD216 rev D makes BFPT 20 DWORDs. Update the BFPT size define to
reflect that.

The check for rev A or later compared the BFPT header length with the
maximum BFPT length, BFPT_DWORD_MAX. Since BFPT_DWORD_MAX was 16, and so
was the BFPT length for both rev A and B, this check worked fine. But
now, since BFPT_DWORD_MAX is 20, it means this check will also stop BFPT
parsing for rev A or B, since their length is 16.

So, instead check for BFPT_DWORD_MAX_JESD216 to stop BFPT parsing for
the first JESD216 version, and check for BFPT_DWORD_MAX_JESD216B for the
next two versions.

Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
---
drivers/mtd/spi-nor/sfdp.c | 7 ++++++-
drivers/mtd/spi-nor/sfdp.h | 5 +++--
2 files changed, 9 insertions(+), 3 deletions(-)

diff --git a/drivers/mtd/spi-nor/sfdp.c b/drivers/mtd/spi-nor/sfdp.c
index f917631..c289395 100644
--- a/drivers/mtd/spi-nor/sfdp.c
+++ b/drivers/mtd/spi-nor/sfdp.c
@@ -548,7 +548,7 @@ static int spi_nor_parse_bfpt(struct spi_nor *nor,
SNOR_ERASE_TYPE_MASK;

/* Stop here if not JESD216 rev A or later. */
- if (bfpt_header->length < BFPT_DWORD_MAX)
+ if (bfpt_header->length == BFPT_DWORD_MAX_JESD216)
return spi_nor_post_bfpt_fixups(nor, bfpt_header, &bfpt,
params);

@@ -604,6 +604,11 @@ static int spi_nor_parse_bfpt(struct spi_nor *nor,
return -EINVAL;
}

+ /* Stop here if JESD216 rev B. */
+ if (bfpt_header->length == BFPT_DWORD_MAX_JESD216B)
+ return spi_nor_post_bfpt_fixups(nor, bfpt_header, &bfpt,
+ params);
+
return spi_nor_post_bfpt_fixups(nor, bfpt_header, &bfpt, params);
}

diff --git a/drivers/mtd/spi-nor/sfdp.h b/drivers/mtd/spi-nor/sfdp.h
index e0a8ded..f8198af 100644
--- a/drivers/mtd/spi-nor/sfdp.h
+++ b/drivers/mtd/spi-nor/sfdp.h
@@ -10,11 +10,11 @@
/* Basic Flash Parameter Table */

/*
- * JESD216 rev B defines a Basic Flash Parameter Table of 16 DWORDs.
+ * JESD216 rev D defines a Basic Flash Parameter Table of 20 DWORDs.
* They are indexed from 1 but C arrays are indexed from 0.
*/
#define BFPT_DWORD(i) ((i) - 1)
-#define BFPT_DWORD_MAX 16
+#define BFPT_DWORD_MAX 20

struct sfdp_bfpt {
u32 dwords[BFPT_DWORD_MAX];
@@ -22,6 +22,7 @@ struct sfdp_bfpt {

/* The first version of JESD216 defined only 9 DWORDs. */
#define BFPT_DWORD_MAX_JESD216 9
+#define BFPT_DWORD_MAX_JESD216B 16

/* 1st DWORD. */
#define BFPT_DWORD1_FAST_READ_1_1_2 BIT(16)
--
1.9.1
\
 
 \ /
  Last update: 2020-05-28 09:59    [W:0.078 / U:4.532 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site