lkml.org 
[lkml]   [2020]   [May]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/2] ARM: dts: stm32: fix uart nodes ordering in stm32mp15-pinctrl
Date
Fix usart and uart nodes ordering. Several usart nodes didn't respect
expecting ordering.

Fixes: 077e0638fc83 ("ARM: dts: stm32: Add alternate pinmux for USART2 pins on stm32mp15")

Signed-off-by: Erwan Le Ray <erwan.leray@st.com>

diff --git a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
index 7cf535dc05f5..5ff1323236e1 100644
--- a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
@@ -1574,67 +1574,6 @@
};
};

- usart2_pins_a: usart2-0 {
- pins1 {
- pinmux = <STM32_PINMUX('F', 5, AF7)>, /* USART2_TX */
- <STM32_PINMUX('D', 4, AF7)>; /* USART2_RTS */
- bias-disable;
- drive-push-pull;
- slew-rate = <0>;
- };
- pins2 {
- pinmux = <STM32_PINMUX('D', 6, AF7)>, /* USART2_RX */
- <STM32_PINMUX('D', 3, AF7)>; /* USART2_CTS_NSS */
- bias-disable;
- };
- };
-
- usart2_sleep_pins_a: usart2-sleep-0 {
- pins {
- pinmux = <STM32_PINMUX('F', 5, ANALOG)>, /* USART2_TX */
- <STM32_PINMUX('D', 4, ANALOG)>, /* USART2_RTS */
- <STM32_PINMUX('D', 6, ANALOG)>, /* USART2_RX */
- <STM32_PINMUX('D', 3, ANALOG)>; /* USART2_CTS_NSS */
- };
- };
-
- usart2_pins_b: usart2-1 {
- pins1 {
- pinmux = <STM32_PINMUX('F', 5, AF7)>, /* USART2_TX */
- <STM32_PINMUX('A', 1, AF7)>; /* USART2_RTS */
- bias-disable;
- drive-push-pull;
- slew-rate = <0>;
- };
- pins2 {
- pinmux = <STM32_PINMUX('F', 4, AF7)>, /* USART2_RX */
- <STM32_PINMUX('E', 15, AF7)>; /* USART2_CTS_NSS */
- bias-disable;
- };
- };
-
- usart2_sleep_pins_b: usart2-sleep-1 {
- pins {
- pinmux = <STM32_PINMUX('F', 5, ANALOG)>, /* USART2_TX */
- <STM32_PINMUX('A', 1, ANALOG)>, /* USART2_RTS */
- <STM32_PINMUX('F', 4, ANALOG)>, /* USART2_RX */
- <STM32_PINMUX('E', 15, ANALOG)>; /* USART2_CTS_NSS */
- };
- };
-
- usart3_pins_a: usart3-0 {
- pins1 {
- pinmux = <STM32_PINMUX('B', 10, AF7)>; /* USART3_TX */
- bias-disable;
- drive-push-pull;
- slew-rate = <0>;
- };
- pins2 {
- pinmux = <STM32_PINMUX('B', 12, AF8)>; /* USART3_RX */
- bias-disable;
- };
- };
-
uart4_pins_a: uart4-0 {
pins1 {
pinmux = <STM32_PINMUX('G', 11, AF6)>; /* UART4_TX */
@@ -1732,6 +1671,67 @@
};
};

+ usart2_pins_a: usart2-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('F', 5, AF7)>, /* USART2_TX */
+ <STM32_PINMUX('D', 4, AF7)>; /* USART2_RTS */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('D', 6, AF7)>, /* USART2_RX */
+ <STM32_PINMUX('D', 3, AF7)>; /* USART2_CTS_NSS */
+ bias-disable;
+ };
+ };
+
+ usart2_sleep_pins_a: usart2-sleep-0 {
+ pins {
+ pinmux = <STM32_PINMUX('F', 5, ANALOG)>, /* USART2_TX */
+ <STM32_PINMUX('D', 4, ANALOG)>, /* USART2_RTS */
+ <STM32_PINMUX('D', 6, ANALOG)>, /* USART2_RX */
+ <STM32_PINMUX('D', 3, ANALOG)>; /* USART2_CTS_NSS */
+ };
+ };
+
+ usart2_pins_b: usart2-1 {
+ pins1 {
+ pinmux = <STM32_PINMUX('F', 5, AF7)>, /* USART2_TX */
+ <STM32_PINMUX('A', 1, AF7)>; /* USART2_RTS */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('F', 4, AF7)>, /* USART2_RX */
+ <STM32_PINMUX('E', 15, AF7)>; /* USART2_CTS_NSS */
+ bias-disable;
+ };
+ };
+
+ usart2_sleep_pins_b: usart2-sleep-1 {
+ pins {
+ pinmux = <STM32_PINMUX('F', 5, ANALOG)>, /* USART2_TX */
+ <STM32_PINMUX('A', 1, ANALOG)>, /* USART2_RTS */
+ <STM32_PINMUX('F', 4, ANALOG)>, /* USART2_RX */
+ <STM32_PINMUX('E', 15, ANALOG)>; /* USART2_CTS_NSS */
+ };
+ };
+
+ usart3_pins_a: usart3-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('B', 10, AF7)>; /* USART3_TX */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('B', 12, AF8)>; /* USART3_RX */
+ bias-disable;
+ };
+ };
+
usbotg_hs_pins_a: usbotg-hs-0 {
pins {
pinmux = <STM32_PINMUX('A', 10, ANALOG)>; /* OTG_ID */
--
2.17.1
\
 
 \ /
  Last update: 2020-05-28 09:42    [W:0.100 / U:0.068 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site